Hydrostatic liquid level sensor suited for sanitary and wash-down environments

Level transmitter complies with 3A standards and is ideal for food, beverage, dairy and pharmaceutical applications.

09/14/2010


The Deltapilot FMB 70 hydrostatic level pressure transmitter from Endress+Hauser is designed for food, beverage, dairy, and pharmaceutical applications. Its watertight Contite pressure measuring cell and 316L stainless steel housing with polycarbonate sight glass withstand harsh wash-down environments in the food industry. The unit can be configured to measure level in units of pressure, height, volume, or mass with an accuracy of ±0.1%.

The Deltapilot FMB 70 can be used to measure level in silos, holding tanks, mixing tanks, filler bowls, balance tanks, and other vessels. It meets 3A sanitary standards, has a watertight NEMA 6P-rated (temporarily submersible) housing, and operates in process temperatures from 14 to 212 °F (-10 to 100 °C).

An optional remote housing can be located up to 25 ft. away from the sensor, ensuring easy access and protection when a measurement is needed in an extra-harsh environment. The remote version has cable connections and is rated to IP69K for high-pressure, high-temperature wash-down sprays.

The measuring cell is hermetically sealed for protection against condensation, aggressive gases, and wash-down environments. The membrane is thick, corrosion-resistant alloy C276 for protection against mechanical damage. Temperature sensors are located between the process diaphragm and the measuring element for continuous temperature compensation of the measurement.

Built-in temperature compensation responds quickly to temperature changes during batch processing and CIP/SIP cycles. E+H says this capability makes the instrument ideal for balance tank applications where rapid temperature changes can lead to process upsets or product losses. The FMB70 also helps optimize the use of milk silos or other large storage tanks where an interlock prevents filling product into the tank until CIP fluids have been fully drained. Accurate measurements in combination with temperature compensation ensure correct empty tank readings.

The transmitter can be programmed with strapping tables for nonlinear tanks. A linearization table with up to 32 points can be entered to make accurate level measurements in spheres, horizontal cylindrical tanks, and vessels with a conical outlet. Density and tank linearization tables can be programmed from the display to calculate mass or volume. The instrument can be programmed to measure level in units of pressure, height, volume, or mass.

Communication options include a 4-20 mA two-wire signal with HART, Profibus PA, Foundation fieldbus, or WirelessHART.

Edited by Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.