Inductors have low core loss, no thermal aging
Low-cost PG0322NL power cube inductor series package height of 9.5 mm is said to be optimal for under the processor heat sink.
Pulse , a Technitrol Co., (electronic- and magnetic-based component manufacturer), offers a new through-hole, shielded, shaped-core power inductors. PG0322NL series is said to be ideal for voltage regulator modules (VRMs), dc/dc converters, and point-of-load applications.
They have a heating current rating of 32-60 amperes (A) and current saturation capability, 30-50 A, for high current, multi-phase buck converter application. With an operating range of -40 to 130 °C, it is said to offer enough margin for thermal de-rating, especially for high-ambient-temperature applications. It has a wide open circuit inductance (OCL), 0.28-1.20s of ±15% and ±8%, respectively, allowing for more accurate current sensing in systems using the inductor as the current sensing element.
Compact 14.5 x 14.5-mm footprint minimizes board space. The inductors are RoHS compliant and meet the EIA 481 standard. Prices average $0.18 per unit for 100,000. Click here to read the Pulse PDF datasheet P642.
—Edited by Mark T. Hoske, editor-in-chief, Control Engineering MHoske@cfemedia.com
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Click here to start this process.