Industrial amplifier measure torque and angle with no programming

HBM's PX460 industrial measurement amplifier is designed to enable users to make precise measurements of raw and filtered torque and angles as well as other data with no programming.

07/07/2014


HBM's PX460 industrial measurement amplifier is designed to enable users to make precise measurements of raw and filtered torque and angles as well as other data with no programming. Courtesy: HBMHBM's PX460 industrial measurement amplifier is designed to enable users to make precise measurements of raw and filtered torque, frequency, pulse, speed, and angle of rotation. 

The combination of the new PX460 hardware with HBM's APM (Advanced Plug & Measure) technology and Transducer Electronic Data Sheet (TEDS) platform for sensor integration allows users to connect torque sensors to the PX460 amplifier and get started right away with no programming.

The PX460 amplifier is a plug-in module for the HBM PMX data acquisition and control system. It can acquire up to four channels of data from torque transducers simultaneously with an analog bandwidth of up to 6 kHz. In addition to powering the torque transducer directly, the PX460 can also acquire encoder signals of up to 2 MHz in rough industrial environments.

Available measurement modes include:

  • Up to four torque flanges (T10, T12, T40) for torque or rotational speed measurement (without detection of the direction of rotation).
  • Two measurement channels for simultaneous measurement, for rotational speed and angle of rotation (with detection of the direction of rotation).
  • One measurement channel for simultaneous measurement, for rotational speed and angle of rotation or reference signal recognition.
  • Two angular/incremental encoders each, SSI, PWM sensors, magnetic transducers or pulse counters.
  • Four measurement channels for frequency measurement up to 2 MHz.

Using an on-board, position-based CASMA filter, the PX460 smooths the torque measurements so that they can be fed directly into a dynamometer or machine control system using real time fieldbuses, such as Profinet, Ethercat, Ethernet IP, or an analog output.

HBM, Inc.

www.hbm.com 

- Edited by CFE Media. See more Control Engineering motor and drive products.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.