Industrial AP/VPN/router with 3.5G cellular support

Aaxeon Technologies' Industrial AP/VPN/Router with 3.5G Cellular support has two 10/100TX ports and can operate in three routing modes, including modem dial-up.

04/07/2009


Aaxeon Technologies AP/VPN/Router with 3.5G Cellular support

Aaxeon Technologies AP/VPN/Router with 3.5G Cellular support is said to be a reliable 802.11b/g WLAN Access Point/Router with two 10/100TX ports. It can be configured to operate in three modes of routing functions: Dynamic/Static IP route, PPPoE authentication, and Modem (56K/GPRS/3G/3.5G Modem) dial-up. In Modem dial-up mode, it supports traditional 56K modem and GPRS/3G/3.5G Modem via USB interface. In addition, the APR-2000 also provides a PD feature on ETH2 to comply with IEEE802.3af P.O.E PD specifications. It also features dual redundant Ethernet ports (recovery time & 10ms), various encryption protection (WEP/WPA/WPA-PSK/WPA2/WPA2-PSK/Radius), VPN setting support, NAT setting support, and much more. The APR-2000 is one of the best solutions for wireless communication applications.



Key features:

  • High speed air connectivity: WLAN interface supports up to 54 Mbps link speed;

  • High security capability;

  • WEP / WPA / WPA-PSK (TKIP, AES) / WPA2 / WPA2-PSK (TKIP, AES) / 802.1x / RADIUS supported;

  • Various kinds of WAN Connection types supported: Dynamic/Static IP, PPPoE, Modem/3G;

  • Dual redundant Ethernet port (Recovery time & 10ms);

  • Switch mode support: Daisy chain support to reduce usage of switch ports;

  • Wireless connection status monitoring;

  • Event warning by syslog, email, SNMP trap, relay, and beeper;

  • IP table to prevent access from unauthorized IP address;

  • Supports VPN Setting (Open VPN , PPTP VPN);

  • Supports NAT Setting (Virtual Server, Port Trigger, DMZ, UPnP);

  • Dual redundant DC power inputs of terminal block;

  • Rigid IP-30 housing design;

  • DIN-Rail and panel mountable; and

  • Wide operating temperature: -35° C to 75° C (-31° F to 167° F).

Aaxeon Technologies

- Edited by Mark T. Hoske , editor in chief
Control Engineering New Products eNewsletter
Register here to select your choice of free eNewsletters .





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.