Industrial-grade computer for oil and gas industries

Moxa's EXPC-1319 hazardous location panel computer is designed for hazardous conditions in the oil and gas industries and has an anti-glare, anti-scratch LCD panel that is visible in direct sunlight.

07/25/2013


Moxa's EXPC-1319 hazardous location panel computer is designed for hazardous conditions in the oil and gas industries and has an anti-glare, anti-scratch LCD panel that is visible in direct sunlight. Courtesy: MoxaMoxa's EXPC-1319 hazardous location panel computer is designed to be used in industrial settings that are potentially hazardous and can withstand extreme temperatures in the oil and gas industries. 

Designed for rugged environments, the EXPC-1319 meets UL Class 1, Div 2 and IEC ATEX Zone 2 hazardous location codes without the need for special measures such as complex and expensive enclosures or additional certification processes. It is qualified for direct installation in hazardous areas worldwide where potentially explosive gases or vapors may be present, such as in petrochemical and chemical processing plants, mining, paint factories or fueling stations. Because these areas are often subject to high humidity, the panels are sealed off to NEMA4X and IP66 ingress standards to protect their sensitive electronics from water ingress, even when they are deployed outdoors. 

In addition, the panels meet T5 temperature requirements by maintaining an operating temperature of 120°C or less (248°F) in ambient temperature of 60°C (140°F). On the other end of the temperature spectrum, the EXPC-1319 is fully functional down to -40°C (-40°F).

Sunlight-readable displays are typically achieved by increasing power to the LED light bars, an approach that produces a brighter display, yet quickly burns out LEDs and significantly reduces overall product life span. The EXPC-1319's anti-glare, anti-scratch LCD panel is visible in direct sunlight.

The EXPC-1319 contains many features that make it suited for use as an operator panel or as a secure system platform for machine control. It comes standard with an Intel 1.8GHz Atom core D525 platform. Depending on preference, the operator can select to use the LCD in either touch-screen or standard mode. 

Serial interfaces, Gigabit LAN ports, USBs, and VGA ports tested for full compliance with flame proofing requirements round out its impressive feature set, along with an expanded set of self-health diagnostics over SNMP for remote monitoring.

Moxa Americas Inc.

www.moxa.com 

- See more Control Engineering HMI and operator interface products.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.