Industrial-grade network video recorder

Eight-channel recorder from Moxa Americas features support for SCADA systems and supports Modbus/TCP for direct communication.

05/22/2013


Eight-channel recorder from Moxa Americas features support for SCADA systems and supports Modbus/TCP for direct communication. Courtesy: MoxaNetworking products provider Moxa Americas and ITS intelligent transportation systems has introduced an industrial-grade eight-channel network video recorder (NVR) designed to meet the special requirements of energy plants, water treatment centers, oil and gas pipelines, oil drilling platforms, chemical processing, public transportation, and other harsh environments. 

Scalable for remote management flexibility, the MxNVR-IA8-T supports bandwidth-efficient H.264, MPEG4 and MJPEG codec's and records up to eight Moxa brand IP cameras or video encoder VPort streams in event-triggered or scheduled recordings over IP networks. Two built-in 2.5 in. SATAII hard disk drive bays allows for user selection and simple expansion in video storage, while six DIs and two DOs support a variety of connected external devices.

Hardened design

Unlike conventional NVRs, the MxNVR-IA8-T has hardened features that include built-in protection against high EMI and electrical surges, superior reliability due to not incorporating a heater or fan, a wide operating range of -40 to 75 °C (-40 to 167 °F), and an ambient humidity range up to 95%. Standard NVRs, like those deployed in commercial video surveillance, often fail in industrial conditions, leading to security being compromised.

SCADA (supervisory control and data acquisition) systems are often used to monitor and control industrial plants or equipment, as well as to safeguard government infrastructure including water treatment and distribution. The Moxa MxNVR-IA8-T supports Modbus/TCP for direct communication with SCADA systems, making it simple to create a distributed monitoring system over an IP network and allowing for the recording and transmission of critical alert videos in response to SCADA events. It also supports IEEE 802.1X for high network security.

Moxa

http://www.moxa.com/Event/Net/2011/MxNVR-IA8/index.htm 

Edited by Peter Welander, pwelander(at)cfemedia.com 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.