Industrial Lasers up 37 percent from 2009

Shipments of complete industrial laser systems up $47 million, 37 percent despite following a decline of 50 percent in 2009

04/08/2011


Shipments of industrial laser equipment and systems in 2010 are reported at $356.2 million, according to AMT, The Association For Manufacturing Technology. Unit sales jumped 44.9 percent for a total of 1,210 units. CO2 lasers accounted for 88.5 percent of the value of shipments, which is virtually unchanged since 2009. Unit sales of CO2 lasers made up 70.2 percent of shipments. The report compiled from 19 manufacturers and distributors also shows the number of lasers configured as full systems accounted for the same share of shipments as in 2008 after a spike in 2009. The value of orders configured as full systems was $309.2 million.

Year-end figures for 2010 are based on actual data reported by companies voluntarily participating in the Laser Market Data Survey. Growth is based on revised 2009 data reflecting any changes that survey participants made during the course of 2010. “The 37 percent pick up in 2010 is a modest rebound in the face of the nearly 50 percent decline in sales during 2009,” stated Patrick McGibbon, Vice President-Strategic Information & Research and Membership. “Prospects look bright for the remainder of 2011 as new technologies are brought to market and fiber lasers continue to expand.”

The web-based benchmarking survey tracks and reports actual order data from North American manufacturers and suppliers of industrial lasers including: complete industrial laser machines (workstations and laser source), beam delivery only (workstations), and source only.

Data is collected at a transaction level which enables multi-dimensional reporting across destination, application, configuration, and end user industry which enables participants to analyze the market by different criteria. Participation is free, but detailed data is available only to companies that actively contribute data. Any North American company building or supplying industrial laser equipment may participate in AMT’s Laser Market Data Survey.

Companies that meet the eligibility requirements and would like to participate in AMT’s statistical program can register at www.amtlasersurvey.com.

www.amtonline.org

The Association For Manufacturing Technology

- Edited by Gust Gianos, Plant Engineering, www.plantengineering.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.