Industrial Networks: Speed Delivers High-Performance Networking

Many demanding industrial applications require millisecond updates and jitter at a microsecond or less. High-speed protocols and appropriate network design can deliver determinism.


Manufacturers and machine builders use EtherNet/IP Ethernet protocol for motion applications with more than 100 axes of coordinated motion control, without special hardware, complex designs, or proprietary technologies. Also, they can combine motion control with other industrial communications needed on one network, helping to simplify design and make it more cost-effective.

Linear topologies (shown), ring and star topologies provide flexible wiring options for EtherNet/IP Ethernet protocol. Courtesy: Rockwell AutomationWhen Rockwell Automation designed EtherNet/IP more than 10 years ago, ControlNet already was, arguably, the most deterministic, high-performance industrial network of its time. Network designers had to choose whether to port the ControlNet “scheduled” approach to Ethernet wire or use standard Ethernet and TCP/IP and its collision-based hubs running at 10 MB. Designers envisioned EtherNet/IP’s future, when collisions in hubs would be replaced with switches, with later network speeds of 100 MB, 1 GB, and beyond.

Within two years, those technology advances became common, making EtherNet/IP faster and more deterministic than ControlNet, enabling industrial devices to be commonly updated in 1 ms or less. The capacity, performance, and determinism available in EtherNet/IP have made it the appropriate for the broadest set of applications, replacing fieldbuses, I/O networks, safety networks, and process control networks.

A few years later, ODVA (the governing organization that owns EtherNet/IP technology) extended that protocol with CIP Sync and CIP Motion technologies, enabling the same standard Ethernet network to provide additional precision and accuracy needed for the most demanding coordinated motion control applications. It uses the IEEE-1588 standard to keep the internal clocks precisely synchronized in all devices within synchronization accuracy of 100 nanoseconds, while effectively neutralizing any effects of “jitter.”

Principal members of ODVA (the independent organization that owns EtherNet/IP technology) are Bosch Rexroth, Cisco, Omron, Rockwell Automation, and Schneider Electric. The ODVA member roster numbers more than 275 companies. EtherNet/IP is the most widely used network, according to an Aberdeen report. The standard, open network’s capacity, performance, and determinism enables users to deploy EtherNet/IP for the broadest set of applications, replacing fieldbuses, I/O networks, safety networks and process control networks.


How to select, apply

Inquire carefully. Network technology capabilities differ. When selecting an industrial network:

  1. Ensure the network can do what the application requires, including real-time I/O and drive control, safety, motion, process, human-machine interface (HMI), machine-to-machine interlocking, and integration with the enterprise. EtherNet/IP does all of these well; older fieldbuses meet some, but not all, of these application needs.
  2. Determine how the preferred devices and preferred vendors can connect. Devices with built-in network ports or choices for option cards are better than those that must be connected to I/O or through a network converter. That’s because connecting devices directly to the network, in this case EtherNet/IP, provides real time connection to the device. This means data flows in real time with less jitter and latency. Wiring that occurs via I/O or using network converters, on the other hand, adds a delay to the data flow. For example, wiring via I/O requires that the programmable logic controller (PLC) read and write code to pass data, meaning it no longer occurs in real-time. Using network converters adds latency, and in some cases it requires the PLC to read and write the data – incurring additional lags in data transmission. EtherNet/IP delivers interoperable Ethernet products from more than 300 vendors providing more than 1,000 product lines.
  3. Ensure the performance, capacity, topology, and segmentation characteristics of the network meet the possible range of applications. EtherNet/IP characteristics follow the latest commercial Ethernet capabilities, and support line and ring topologies standardized through IEC and ODVA.
  4. Ensure the network technology will meet future needs. EtherNet/IP inherits the technology advances from, and compatibility with standard commercial Ethernet.
  5. Ensure the technology is easy enough to live with. EtherNet/IP simplifies automation architectures by providing one network technology that leverages the skills and features of commercial Ethernet.

Brian Oulton is networks business director, Rockwell Automation. Edited by Mark T. Hoske, CFE Media, Control Engineering,

High Performance Industrial Networks: research and discussion 

Table of High-performance Industrial Networks

High-performance industrial networks include:

CC-Link IE Field network 


Ethernet Powerlink 

EtherNet/IP with CIP Sync and CIP Motion technologies 

Open PLC Network 

Profinet IRT 

Sercos III 

Courtesy of Control Engineering

Control Engineering webcasts include more on Ethernet.

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Machine design tips: Pneumatic or electric; Software upgrades; Ethernet advantages; Additive manufacturing; Engineering Leaders; Product exclusives: PLC, HMI, IO
Industrial wireless cyber security: More complex than black and white; IIoT at the I/O level; Process modeling; Cyber security research
Robotic advances: Software, form factors; System-based ROI; Embedded control; MES and information integration; SCADA and cyber security; Position sensor; Controller, I/O module
Learn how Industry 4.0 adds supply chain efficiency, optimizes pricing, improves quality, and more.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Cyber security attack: The threat is real; Hacking O&G control systems: Understanding the cyber risk; The active cyber defense cycle