Industrial PC goes embedded

When industrial PCs first hit the market, they were only slightly modified from the consumer PCs used at home and in the office. In recent years, manufacturers of computer hardware have been paying closer attention to the needs of industry. One significant result of this attention is that reduced instruction set computer (RISC) processors have become the first choice of CPU for embedded applic...

07/01/2008


When industrial PCs first hit the market, they were only slightly modified from the consumer PCs used at home and in the office. In recent years, manufacturers of computer hardware have been paying closer attention to the needs of industry.

One significant result of this attention is that reduced instruction set computer (RISC) processors have become the first choice of CPU for embedded applications. RISC processors use less power, can operate without a fan, and have a wide operating temperature range.

The current trend for industrial communication front-end management applications is to look for economical, all-in-one computers suitable for use in a range of computing applications. Typical requirements include several serial ports, at least two Ethernet ports, and an embedded Linux operating system, which is often the first choice for creating efficient communication management applications. Engineers also know that the typical hard drive is not a good data storage device for industrial communication and control applications. Better choices are to use an internal Flash card, external CompactFlash (CF) or external USB storage device. Having a sufficient number of external connection ports is also important if you need to add additional peripheral devices.

To address these issues, Moxa Technologies has designed a computer suited for industrial control applications. The company’s Universal Communicator (UC) series satisfies industry’s many requirements. Foremost among these are the no-fan requirement and an airtight, dust-proof enclosure. Moreover, Universal Communicator does not have a hard disk, uses less power than an industrial PC, and provides more stable operation, according to Moxa.

Universal Communicator’s RISC processor needs only 12 W to operate, compared to the typical industrial PC that requires at least 300 W. The computer’s eight serial ports, two 10/100M Ethernet ports, and Compact Flash and USB storage expansion slots suit it to meet automatic industrial control application requirements. Since floor space (or the lack of floor space) is an important consideration, the largest Moxa Universal Communicator product has dimensions of 197 x 125 x 44 mm, smaller than the usual PC or industrial PC. www.moxa.com





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.