Integrated prototype functions ease control panel design

Software helps control panel designs and the component selection, prototyping, setup, and testing of control panel components prior to assembly. Such software also can help with optimal component placement, standards compliance, and ensure that programming works upon installation.

06/18/2010


Design, setup and testing of control panel components inside software prior to assembly enable appropriate component selection, optimal placement and standards compliance. It also ensures programming works after installation. Such built-in prototype functionality, sometimes not even referred to as prototyping by control vendors, speeds time to market for control panel builders, system integrators, and original equipment manufacturers. Software can improve quality, reduce risk, ease integration, streamline commissioning, and better manage product lifecycles, compared to paper-based (or lost) project documentation.

Prototype functionality allows easier upgrades, lowering costs over the lifecycle of the control cabinet or panel and for use of connected components beyond the control panel. Multiple entrants in Control Engineering’s Control Panel Design Contest in in the past two years agree about the value of such software tools.   While software cannot do everything, and no software package provides all of the following functionality, control panel designers may use software for:

  • Electrical design;
  • 3D prototyping for component selection and layout;
  • Control panel compliance regulations, such as UL 508A, the Standard of Safety for Industrial Control Panels, ANSI/UL 347, "High Voltage Industrial Control Equipment," and ANSI/UL 508C, "Power Conversion Equipment," among other standards.)
  • Control software design, analysis and testing, and integration with human-machine interface and networks; and
  • 3D motion simulations for motion-related devices connected to the panel.   In general, software is deeper in functionality than just a few years ago. It’s also quicker to learn, easier to use, modular (allowing users to buy want is needed), and may be available as a software as a service (SaaS).

During design, intelligent software cautions the user about incompatibilities during design. This allows a smoother prototyping in software and hardware, and in the final assembly.  Product images and dimensions can be imported from libraries of components. Software can suggest placeholders, links, and missing components. Bills of material (BOM), incorporating and checking for compatibilities from multiple manufacturers, may be automatically generated.

Built-in guides and wizards automate many steps, transferring I/O (input/output) tags from design to runtime software, saving time and eliminating a source for errors. Imported knowledge from prior projects, other areas of an organization, and other software can be incorporated, and designs can be collaborative over multiple locations, as needed. Digital prototyping software can run diagnostics prior to assembly, ensuring challenges are addressed during design, more economically, and quickly than during assembly.

On the hardware side, many control component manufacturers offer advice, examples, videos, and starter kits to help with initial designs. If it’s the first design of many, they may even offer incentives. Users should refer to various vendors for details.

For more about various prototyping, software tools, and control panel design, also see:

www.abb.us/product/us/9AAC100741.aspx?country=US

www.eaton.com/UL508A

www.boschrexroth-us.com

www.controleng.com/controlpanelcontest

www.phoenixcontact.com/splash/55525.htm

www.ni.com/prototyping

http://ulstandardsinfonet.ul.com

http://usa.autodesk.com  

- Mark T. Hoske, Control Engineering content manager, www.controleng.com, part of CFE Media, www.cfemedia.com    



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.