Integration case study: Small retail store

A remodel of a retail building was simulated using an energy modeling program to determine the impact on the HVAC cooling loads.

04/16/2013


A remodel of a 3000-sq-ft retail building was simulated using an energy modeling program to determine the impact on the HVAC cooling loads. For the baseline design (simulating the existing lighting in the space), 75 W halogen track lighting fixtures and 74 W (input power) 2-x4-ft recessed, lay-in T12 lighting fixtures were used. This was compared to the same retail building to be remodeled using energy-efficient lighting fixtures. The energy-efficient versions used were 13 W LED track lighting and 48 W high-performance T8 lighting systems.

When comparing the two simulations for the building cooling requirements, the baseline existing design required 14.5 tons of cooling while the energy efficient remodeled design required only 10.0 tons of cooling. Effectively, the cooling load was reduced by 4.5 tons. While the cooling load was shown to be significantly different, the heating load difference was minimal. Replacing the baseline lighting fixtures with energy-efficient lighting fixtures resulted in a difference of only 0.47 MBh. A small difference such as this would not change the size of the heating option for the HVAC equipment selected.

This case study illustrates that by incorporating an energy-efficient lighting design, not only are there significant energy savings in lighting and HVAC power, but also cost savings in initial equipment purchase and installation.


Justin Schultz is lead electrical engineer at Metro CD Engineering and serves as education chairman and board member for his local Illuminating Engineering Society (IES) section. He is a 2011 Consulting-Specifying Engineer 40 Under 40 award winner and an active member of the USGBC Central Ohio Chapter. Brian Johnson is a mechanical engineer at Metro CD Engineering. He serves as a member of the USGBC Central Ohio Emerging Professionals Group and Advancement Committee as well as the Young Engineers in ASHRAE in Columbus, Ohio.  



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.