Integrative design process education

The June 14, 2012, class is designed to teach architects and engineers how the integrative design process, which isn't often used, can be advantageous in designing buildings.

05/08/2012


ComEd and Nicor Gas, together with The Energy Center University, are sponsoring an all-day class on integrative design process for buildings and how it can benefit engineers and architects and designers. The class is scheduled for June 14, 2012, and will be held in Chicago (exact location TBD). The instructors for the class are Sachin Anand, P.E., LEED AP and Helen Kessler, FAIA, LEED AP. 

The course will explain the integrative design process using specific examples and will use workshops and simulations to engage the class in a more direct way. Check-in begins at 8 A.M. on June 14 and a continental breakfast will be provided. The seminar begins at 8:30 and will run until 4:30 P.M. with periodic breaks and a lunch included.

Continuing education credits will be provided for:

Energy Center University is an Authorized Provider for the International Association for Continuing Education and Training (IACET). 0.7 Continuing Education Units will be given for attending this training.

Members of the American Institute of Architects (AIA) will receive 7 HSW/SD/LU (Learning Units) for attending. The Illinois Society of Professional Engineers (ISPE) has approved this course for 8.0 Professional Development Hours (PDH). The United States Green Building Council (USGBC) has recognized this course for 7 credit hours as part of the GBCI Credentialing Maintenance program.

Registration is $169 and must be made in advance. Further details can be found here.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.