Iran fires up nuke plant, connects to grid

If you think nuclear plant construction here is slow, Iran’s pace is glacial but after 35 years has finally come full term.

09/06/2011


Iran has finally entered the atomic age, publically at least, as its one and only more-or-less finished nuclear power plant connects to the grid. The Bushehr (strictly peaceful) nuclear power plant is about 750 miles south of Tehran on the Persian Gulf, and is a 1,000 MW, (presently) single unit facility. Originally the plan was to have four units on this site, but as of now the plan has been pulled back to three, which may still be wishful thinking. There have been many premature reports that it is just about ready to go online any minute now, but this time it looks like it’s legit, running at low power and ramping up to hit 40% of total output by next week.

   Construction on this plant began in 1975 led by Siemens and a group of other German companies back when the Shah was still in power. (Raise your hand if you’re old enough to remember the Shah.) Apparently he was looking ahead to the time when oil would be too expensive for use as a fuel, and had plans to build 23,000 MW of nuclear generating capacity. Things ground to a halt after the revolution in 1979. Siemens and its syndicate abandoned the project leaving two units under construction. Things sat quietly corroding in the hot salty air by the gulf, with occasional bombing damage during the Iran-Iraq war in the mid-1980s.

   The Iranians brought in a Russian group to start construction again in the mid-1990s, and work started slowly with the expectation of completion by 2001. The site quickly became a hodge-podge of equipment as Atomstroyexport decided to use its reactor design along with some of the remaining Siemens equipment. The international community in general wasn’t excited about the prospects, and Russia was having its own internal problems during that time, so it all got pretty complicated politically. Still, negotiations continued, and by 2005, the U.S. withdrew its official opposition to the project and things were stable enough with the Russians for things to begin again in earnest. Now it’s ready to go.

   While I think nuclear power is a pretty good idea in most situations, this one seems a little scary. Let’s accept for the sake of argument that this facility does not offer support for Iran’s desire to create weapons-grade nuclear material. We’ll also assume that Russian operators and trainers are on site to keep things on an even keel, running a Soviet-era reactor design. It still gives me the heebie geebies. This is just one more reason I’m glad I don’t live over there.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.