ISM manufacturing index ends 2012 above growth mark

December figure in at 50.7% as experts see firming growth

01/07/2013


Institute of Supply Management logo. Courtesy: ISMManufacturing closed out 2012 on the upswing, as the monthly ISM Report showed a growth pattern and a solid increase over November.

After dropping below the 50% mark that indicates growth a month ago, the December ISM report came in at 50.7%. That’s a 1.5 percentage point increase from November, and marked the eighth month in 2012 that the index topped the 50% mark. In addition, the index indicated growth in the overall U.S. economy for the 43rd consecutive month.

“This month's PMI reading moved manufacturing off its low point for 2012 in November. The New Orders Index remained at 50.3%, the same rate as in November, indicating growth in new orders for the fourth consecutive month,” said Bradley J. Holcomb, chair of the Institute for Supply Management Manufacturing Business Survey Committee. “Comments from the panel this month are mixed, with some indicating a strengthening of demand and others indicating a continuing softness in demand. Additionally, many respondents express uncertainty about government regulations, taxes and global economics in general as we approach 2013.”

Among those comments included:

  • "Many Chinese sources are coming to us with cost reductions to maintain their current business volumes."
  • "We are seeing stabilization of orders and costs as well as production capacity for the first time in months." (Miscellaneous Manufacturing)
  • "Black Friday was good, but forward economic visibility is foggy." (Computer & Electronic Products)
  • "The election is over; unemployment is dropping; consumer confidence is increasing as are home sales prices. We seem to be turning the corner. New car sales are increasing, which affects our customers." (Fabricated Metal Products)
  • "Uncertainty in additional government regulations and tax climate seems to be slowing orders." (Chemical Products)

Other indexes also indicated growth in December. The Production Index registered 52.6%, a decrease of 1.1 percentage points, indicating growth in production for the third consecutive month. The Employment Index registered 52.7%, an increase of 4.3 percentage points, indicating a resumption of growth in employment following only one month of contraction since September 2009. Both the Exports and Imports Indexes registered 51.5%, returning both indexes to growth territory following consecutive periods of contraction of six and four months, respectively.

A PMI in excess of 42.6%, over a period of time, generally indicates an expansion of the overall economy. Over the last six months of 2012, manufacturing registered expansion in three months and contraction in three months, moving back and forth across the 50% mark.

"The past relationship between the PMI and the overall economy indicates that the average PMI for January through December (51.7%) corresponds to a 3.1% increase in real gross domestic product,” Holcomb said. “In addition, if the PMI for December is annualized, it corresponds to a 2.7% increase in real GDP annually.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.