ISM number slip, but growth continues

PMI is down slightly from peak, but stays above 60 for fourth straight month

05/09/2011


Economic activity in the manufacturing sector expanded in April for the 21st consecutive month, and the overall economy grew for the 23rd consecutive month, say the nation's supply executives in the latest Manufacturing ISM Report On Business.

The report was issued today by Norbert J. Ore, chair of the Institute for Supply Management Manufacturing Business Survey Committee. "The recent trend of rapid growth in the manufacturing sector continued in April as the PMI registered above 60% for the fourth consecutive month. The New Orders and Production Indexes continue to drive the PMI, as they have both exceeded 60% for five consecutive months. 

“Manufacturing employment appears to have developed significant momentum, as the Employment Index readings for the first four months of 2011 are the highest readings in the last 38 years. Inventory growth also took place in April after two months of destocking; however, the inventory restocking would appear to be necessitated by the strong performance in new orders. While the manufacturing sector is definitely performing above most expectations so far in 2011, manufacturers are experiencing significant cost pressures from commodities and other inputs."

Of the 18 manufacturing industries, 17 are reporting growth in April, in the following order: Wood Products; Plastics & Rubber Products; Primary Metals; Transportation Equipment; Fabricated Metal Products; Computer & Electronic Products; Apparel, Leather & Allied Products; Machinery; Textile Mills; Paper Products; Electrical Equipment, Appliances & Components; Nonmetallic Mineral Products; Miscellaneous Manufacturing; Food, Beverage & Tobacco Products; Chemical Products; Printing & Related Support Activities; and Petroleum & Coal Products. Furniture & Related Products is the only industry reporting contraction in April.

Manufacturing continued its rapid growth in April as the PMI registered 60.4%, a decrease of 0.8 percentage point when compared to March's reading of 61.2%. A reading above 50% indicates that the manufacturing economy is generally expanding; below 50% indicates that it is generally contracting.

A PMI in excess of 42.5%, over a period of time, generally indicates an expansion of the overall economy. Therefore, the PMI indicates growth for the 23rd consecutive month in the overall economy, as well as expansion in the manufacturing sector for the 21st consecutive month. "The past relationship between the PMI and the overall economy indicates that the average PMI for January through April (61%) corresponds to a 6.5% increase in real gross domestic product,” Ore said. “In addition, if the PMI for April (60.4%) is annualized, it corresponds to a 6.3% increase in real GDP annually."

What respondents are saying:

  • "Rapidly rising raw material costs putting extreme pressure on profits." (Food, Beverage & Tobacco Products)
  • "Plastic resin product prices are climbing so fast that [suppliers] are attempting to increase prices on orders already accepted but not [yet] delivered." (Chemical Products)
  • "Customers are rebuilding safety stock levels of inventory, and also trying to buy ahead of material price increases." (Plastics & Rubber Products)
  • "Market continues to get stronger month over month. Recovery is faster than anticipated." (Transportation Equipment)
  • "Pressure from offshore suppliers continues to mount with exchange rate increases and seasonal demand for capacity." (Miscellaneous Manufacturing)

www.ism.ws

Institute of Supply Management

- Edited by Gust Gianos, Plant Engineering, www.plantengineering.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.