IT for green manufacturing is changing the cost-prohibitive mind-set

For Harry Brix, director of procurement at Syosset, N.Y.-based Paradigm Group, a supplier of janitorial and sanitary products, green manufacturing is “very chic.” Brix says green strategies emerged in the 1970s, but interest waned, only to surface again in the '90s, and wane again. Many believe this time it's here to stay—namely Nabil Nasr, Ph.

05/01/2008


For Harry Brix, director of procurement at Syosset, N.Y.-based Paradigm Group , a supplier of janitorial and sanitary products, green manufacturing is “very chic.” Brix says green strategies emerged in the 1970s, but interest waned, only to surface again in the '90s, and wane again.

Many believe this time it's here to stay—namely Nabil Nasr, Ph.D., director of the Center for Integrated Manufacturing Studies at the Rochester Institute of Technology.

“There is very serious interest from industry surrounding green manufacturing,” says Nasr. “We are starting to see the shift in philosophy, acceptance, and emphasis.”

But an interest in green manufacturing doesn't necessarily translate into a commitment to making the necessary changes, as documented in a recent survey of manufacturers conducted by U.K.-based Lanner Group , a business process analysis organization. The survey found only 9 percent of respondents prioritized reduction of their carbon footprint in 2007. When asked why, 72 percent of the respondents said they had other priorities to address first, 15 percent said the process is too costly, and 8 percent said they didn't know how to do it.

Such a mind-set disturbs Nasr.

“There is a belief among some manufacturers that green manufacturing costs money,” he says, “so they wait until they have extra money to cover the expenses. This is absolutely wrong!”

In fact, says Nasr, with proper training in information technology and usage, manufacturers can identify tremendous opportunities without incurring any costs. “These initiatives offer competitive market advantages,” he says.

Ralph Bianculli, president and CEO of Paradigm Group, agrees. “Historically, one problem with green products is they're quite a bit more expensive than traditional products, so it was difficult to create a market for them,” he recalls. More recently, though, manufacturers that have invested money in greener production processes have been able to cut the cost of their green products.

One strategy, says Bianculli, is retooling near the end of the manufacturing line. “This allows recapturing some of the product and recycling some of its content,” he explains.

Nasr sees other opportunities for technology in transitioning to green manufacturing.

“It's necessary to take a system-wide view,” he explains. “Green manufacturing cuts across every aspect of manufacturing, including information decisions, process technologies, energy consumption, material selection, and material flow. A lot of the decisions manufacturers make are related to cost, function, and quality. Now they are adding another dimension, which is sustainability.”

There are a number of technologies that can prove useful, Nasr adds, and they vary across industries. Some sectors are interested in technologies that eliminate lead, and those that recover material from the product during processing. In the automotive industry, the focus is on technology that can reduce emissions, as well as finding replacement materials that improve conservation efforts.

According to Lanner Group, another useful tool is simulation technology. In fact, 90 percent of Lanner's survey respondents say if its potential is maximized, simulation technology can facilitate greener manufacturing.

Simulation has application in new plant design/layout, capital equipment evaluation/justification, new process design, resource planning, and material delivery logistics.

“Using simulation to improve business processes is as close to guaranteeing an outcome as is possible,” states David Jones, CEO of Lanner. “It can provide visibility and clarity, and eliminate unforeseen costs that are common in new projects. Effective use of simulation technology can map processes so that environmental initiatives can be aligned with cost savings.”



Processes with environmental impact opportunities

Metal casting

Materials treatment

Metal fabrication and machining

Cleaning and surface preparation

Bonding and sealing

Welding

Metal finishing and plating

Painting and coating

Chemical and hazardous materials management

Waste management



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Controller programming; Safety networks; Enclosure design; Power quality; Safety integrity levels; Increasing process efficiency
Additive manufacturing benefits; HMI and sensor tips; System integrator advice; Innovations from the industry
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me