Korean utility researchers use simulation platform to study clean-coal technology

Korea Electric Power Research Institute uses operator training and dynamic simulation solutions from Invensys Operations Management to develop Taean-based IGCC power plant.

12/17/2009


Invensys Operations Management , a provider of technology systems, software solutions, and consulting services to process and manufacturing industries, announced that it has delivered comprehensive simulation and training solutions to the Korea Electric Power Research Institute (KEPRI), South Korea's leading electric power research institute and part of Korea Electric Power Corporation (KEPCO).

Under the terms of the agreement, Invensys provided an operator training simulator (OTS), including its Dynsim high-fidelity simulation for operator training and process engineering design studies and Wonderware InTouch human machine interface (HMI) for graphic visualization of processes. Invensys also supplied engineering and technical services to develop the dynamic simulation models and to configure the HMI for operator training and engineering.

The solutions will be implemented at KEPRI's proposed generic-model integrated gasification combined cycle (IGCC) plant to be built in Taean, South Korea. Viewed as a state-of-the-art facility and testing ground, the plant will be used to prove the viability of clean-coal power plants worldwide. KEPRI process, mechanical, and control engineers will use the dynamic simulators to understand new IGCC technology, make design decisions, prepare operating procedures, and train plant operators.

"We needed a robust solution that was scalable, customizable and flexible enough to meet the special needs of our engineers during the design phase and to give our operators a jump start on learning this new technology," says Yong-Jin Joo, Ph.D., project manager, KEPRI/KEPCO. "I am extremely pleased with the dynamic model Invensys delivered. As the first OTS of the first IGCC plant in this country, the Invensys simulator will provide operational insight into applying IGCC technology, helping to lower the barriers to developing clean-coal power in South Korea and the world."

" Invensys has deep experience in dynamic modeling of coal gasification and providing operator training simulators in both the power and process industries," said Tobias Scheele, Ph.D., vice president, advanced applications, Invensys Operations Management. "Combining our IGCC industry knowledge with the flexibility and power of our Dynsim simulation program, we were able to provide KEPRI with a scalable OTS that will meet their growing needs."

In other news, Invensys Operations Management, has announced the newest release of its SimSci-Esscor Visual Flow 5.3 fluid simulation software for the design and rating of flares and relief networks. The new release integrates with the Sim4Me Portal, and provides a Microsoft Excel user interface for simulation. This provides an added layer that the company says enhances the return on investment in any model by extending its use to anyone who can use Excel spreadsheet software.

The company has also unveiled version 3.5 of its Wonderware Enterprise Integrator software solution. Invensys says this enables secure integration of Wonderware manufacturing execution software (MES) applications, such as Operations, InBatch, Intelligence, and other shop-floor applications, with enterprise resource planning, product lifecycle management, supply chain management, laboratory information management, and other enterprise systems.

-Peter Welander, process industries editor, PWelander@cfemedia.com
Control Engineering Information Control Monthly eNewsletter
Register here to select your choice of free eNewsletters .





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.