Life cycle safety engineering

Because global and competitive issues are driving more companies to evaluate the life cycle cost of equipment ownership, life cycle safety engineering becomes an important aspect of the cost of ownership.

07/13/2010


Machine safety has been a big concern for a long time here in the U.S.  OK – some would argue that it’s only been a real concern since the early 1970’s with the commissioning of OSHA. During the first 20 to 30 years that followed the birth of OSHA very little in comparison was invested in safety solutions which were regulated to hardwire technology. However, during the last 10 to 15 years there’s been significant investment in safety automation solutions because hard wiring safety is no longer exclusively required. Although the control elements comprise a rather large chunk of overall machine safety – there’s a lot more to consider. Global and competitive issues are driving more companies these days to consider evaluating the life cycle cost of ownership when evaluating capital equipment investments. Therefore, life cycle safety engineering becomes an important aspect of the cost of ownership.

Who’s heard of – LIFE CYCLE SAFETY ENGINEERING?

 The term “life cycle safety” refers to all safety factors that could and should be taken into consideration for the life of a piece of equipment. These safety considerations begin at the concept stage of a project and continue through to the de-commissioning stage of the machine. Some of the topics to consider include:

  • Understanding all relevant and current codes and regulations
  • Site modifications and construction
  • Grounding and power provisions including arc flash
  • Mechanical designs to minimize hazard points
  • Electrical and controls designs to mitigate hazards
  • Component selections for life cycle and disposal considerations
  • Material and liquid selections for life cycle and disposal considerations
  • Risk assessments for all modes of operation and maintenance
  • Lockout & tagout procedures and requirements
  • Risk assessments for material handling
  • Operator and maintenance safety
  • Comprehensive training for all personnel for the life cycle
  • De-commissioning procedures and discharging all sources of power
  • Disposal concerns and regulations particularly for hazardous materials
  • Etc.

In my opinion, codes and regulations help provide for the protection of personnel and equipment but unforeseen accidents dramatically impact the cost of ownership and productivity for machinery. More importantly, it’s the design engineer’s understanding and application of life cycle safety considerations that will lead to a safe and productive machine installation.

Remember:

  1. The risk assessment process continues for the machine life cycle; and
  2. Residual risk will never equal zero.

Please add a comment using the tool below to help bring this level of engagement to the forefront on industry.

Also:

- Read a related post: Machine Safety and “reasonably foreseeable misuse” about risk analysis.

- See prior post: Cableless (Wireless) Operator Panel Applications.

- Reference the Control Engineering article: Part 1: What is OSHA's Stance on New Safety Standards?

For more on Machine Safety visit: www.jbtitus.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.