Low cost: Mini cabinet cooler, heat exchanger

Noren Products Inc. released its smallest and lowest-cost air-to-air heat exchanger, a cabinet cooler to protect electronics, drives, and controls from....

04/03/2008


Menlo Park, CA Noren Products Inc. released its smallest and lowest-cost air-to-air heat exchanger, the "Mighty Mini" CC100 cabinet cooler, designed to provide low cost, small form factor protection against overheating in all types of electrical, electronic, drive and device control panels. Noren Products develops and manufacturers thermal products such as heat pipes, thermal pins, and heat exchangers.
As the newest addition to the Noren Products Compact Cabinet Cooler product line, the CC100 provides closed-loop cooling within sealed enclosures, protecting valuable electronics from contamination caused by dirt, oil, humidity and corrosives. Compact design uses unique and highly efficient heat pipe technology, to remove the excess heat from electrical and electronic enclosures, Noren Products says.
The company’s CEO, Kimberley Dawn, said: "Our customers asked for a low cost, small form factor solution, for cooling their sealed control panels, and we can now offer just that. The CC100 provides protection from downtime caused by heat failure, while keeping contaminants out, and at a much lower operating cost than air conditioning.”
It is rated at 700 BTU/hr cooling capacity with efficiency of 10 Watts per degree Celsius and offers years of reliable and near zero-maintenance operation. Small form factor allows installation on even the smallest enclosures, extending the life of valuable electronics and avoiding costly downtime due to heat and contamination.
The “Mighty Mini CC100” is the smallest of the Noren Products line of Compact Cabinet Coolers, which are offered in air-to-air and air-to-water configurations. Noren’s line includes units rated from 700 BTU/hr to 57,900 BTU/hr in NEMA 12, 3R, 4, 4X, stainless steel and UL/cUL.
Free, easy-to-use online cabinet cooler sizing program at the company's URL determines the exact cabinet cooler for the application; application engineers also can provide recommendations by phone.
– Edited by Mark T. Hoske , editor in chief
Control Engineering System Integration eNewsletter
Register here and scroll down to select your choice of eNewsletters free .





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.