Machine control: Lack of wireless interoperability concerns industrial automation engineers
Lack of interoperability is one of various concerns plaguing engineers considering adoption of wireless technology.
According to Frost & Sullivan research, approximately 83% of the end users across process and factory automation rated interoperability as a medium to high concern. Although the end-user concern is expected to hamper the adoption of wireless in the near future, the upcoming standards like SP100.11a and wireless HART are going to address this issue. In addition, numerous suppliers are supporting the initiatives that aim to establish a common standard. The increasing success stories of smooth wireless integration and functioning are likely to reduce end-user conservatism and raise the level of adoption of wireless devices.
End users’ perspectives on interoperability
The level of concern varies depending on different parameters such as end-user environment, types of wireless devices being used, the application area and the experiences of the end user with wireless devices. The refining and pharmaceutical industries, for example, expressed a greater concern over interoperability among end users. They believed that integration with the existing network is important and the presence of numerous controls, fieldbus and automation devices implies that the wireless devices need to integrate seamlessly into the existing network. Similarly, in the oil and gas and the water and waste water industry wherein one of the preferred application areas for wireless devices is telemetry, end users were convinced that the wireless devices must be compatible with each other in order to ensure that there is a smooth flow of data.
In the past, interoperability was not as important as currently. People predominantly built their own systems or purchased them from a single supplier. Increasing plant automation, however, has spurred the demand for wireless devices and systems for numerous applications, such as monitoring, alarm and telemetry.Systems and solutions are often based on proprietary protocols without reference to a common standard or architecture. As a result, these devices offered from multiple suppliers are not often compatible with one another. So even though options have increased, end users have become concerned about device incompatibilities. End users are wary of becoming locked into a proprietary system that may hinder future advancement. Integration issues with existing infrastructure increases time and effort spent by end users, while they would prefer plug-and-play devices.
End users are also extremely cautious of investing in wireless when they are not confident about the benefits that wireless has to offer. Given that the end users will not be very keen to replace the existing fieldbus installation, suppliers should look to integrate wireless devices to existing wired fieldbus. Currently, plant IT network assumes significance over automation network. Hence, clear boundaries and smooth integration of wireless is required with the wireless devices existing network. The existence of several open and proprietary communication protocols results in confusion among the wireless devices end users who are ready to wait until a uniform standard is established.
Attainment of true interoperability would require an open architecture such as software based systems, in which various standards could be applied. Software is capable of communicating with both standards-based and proprietary wireless networks. End users also believed that the lack of universal standard is another major concern. The need of the hour is to have common standards that offer interoperability from both the supplier and the end-user perspective.
To increase the level of adoption of wireless in the discrete and the process environment, suppliers must come up with wireless devices that are compatible with each other. Moreover, there is a need for a uniform standard and open architecture to enable the seamless integration of wireless devices with existing plant infrastructure such as fieldbus or other control systems. End users must also be convinced about interoperability through product trials or demos suppliers should offer. Nevertheless, the future for wireless devices in automation looks promising.
— Syed Tauseef Ahmad is a research analyst for industrial automation and process control in Europe at Frost & Sullivan. Contact him through Joanna Lewandowska . Please provide your full name, company name, title, telephone number, e-mail address, city, state and country.
— Edited by C.G. Masi , senior editor
Control Engineering News Desk
Register here and scroll down to select your choice of eNewsletters free.
- Events & Awards
- Magazine Archives
- Digital Reports
- Global SI Database
- Oil & Gas Engineering
- Survey Prize Winners