Machine Safety and Wireless Devices

Conventional machine safety has been challenged for the last 10 years with new technology and standards. Safety automation has led the new technology pack while NFPA 79 took the lead on the standards side. Both combined in 2002 to introduce safety PLCs, safety fieldbus, and e-stops on a safety rated bus. The latest challenge to conventional safety is wireless (aka cableless) innovation impacting devices, fieldbus technology, and machine control applications. Are we ready?

06/16/2011


JB Titus, CFSEConventional machine safety has been challenged for the last ten years with new technology and standards. Safety automation has led the new technology pack while NFPA 79 took the lead on the standards side. Both combined in 2002 to introduce safety PLCs, safety fieldbus, and e-stops on a safety rated bus. The latest challenge to conventional safety is wireless (aka cableless) innovation impacting devices, fieldbus technology, and machine control applications. Are we ready?

     Innovation of technology most often drives the changes to industrial standards. Therefore, I can think of several new technologies evolving into machine control and machine safety.

- Wireless fieldbus technology

- Wireless/cableless operator control panels

- Wireless sensors

- Wireless remote I/O

- Wireless remote control

- WirelessHART, and

- Wireless switches… to name a few.

    Who has any idea how these technologies will directly or indirectly impact machine safety?

     Some of the industry standards have already changed or updated their language to allow and in some cases provide specific required steps that “shall” be followed when applying these technologies for safety applications. Some of these technologies are even safety rated by NRTLs (Nationally Recognized Testing Laboratories) like TUV or UL to various SIL and/or Performance Levels.

     In my opinion, the direct impacts on machine safety should be less worrisome because we deal with direct impacts every day on the shop floor. It’s the indirect impacts that most often surprise everyone and almost every surprise is dangerous. The book says to identify all hazards via a risk assessment and to mitigate the hazards to acceptable levels.

     So, is the risk assessment considered as key to the proper application of these technologies?

     Let’s hear your ideas?

     Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety and Wireless Devices.

     Did you see the Safety Integration Webcast?

     Related articles:

Designing In Machine Guarding   

Fieldbus Foundation brings more information through HSE with Wireless and Remote I/O

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.