Machine Safety - Cableless vs Wireless

03/15/2010


Machine Safety and “cableless” vs “wireless” has been an ongoing discussion over the past two years as this technology rapidly travels through its evolution cycles to the plant floor. Personally, I’ve sat in a dozen discussions over these two terms and how to choose a word that best describes the application as well as the issues. To wrestle this one to the ground it’s my recommendation that we choose an application like - cableless pendant control. Now, let’s discuss these two terms and which one best fits the application.

The application is a hand held pendant operator station which means it functions like an operator station and it’s portable. Since it is portable and cableless that means that it has its own power supply and that the communication signals for control are not cabled back to a panel. Therefore, the communication signals are wireless. If this particular pendant operator station also includes safety functions like emergency stop then the safety-related communication signals are likewise wireless. So, is this particular application and device “cableless” or “wireless”?

In my opinion the answer is “cableless”! The reason is that wireless in this case is a more generic term and it only describes the type of control communication technology. Being generic, this term can also apply to wireless - sensors, controllers, monitors, switches, etc. which can all be rigidly mounted and cabled for power. Since a cableless operator control station also includes its own power supply (like a battery), there are no cables for power or control. Therefore, this application in my opinion should be considered a “cableless” application which sometimes can also have safety-related functions. This understanding is critical to the safety standards community because it directly impacts the application requirements that must be addressed by the standard.

Some of the application issues include; audible and/or visual signs to show active status, possible out of sight storage when not in use, zone control (yes or no), what happens if there’s a loss of signal or power, can the panel stay active if a docking station is provided, to mention a few.  Many of these application issues do not need to be addressed if the application is only wireless and not portable. I advise that a thorough risk analysis of your application issues is essential in considering this technology around your machine.

For more on Machine Safety visit: www.jbtitus.com

Posted by J.B. Titus on March 15, 2010



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Integrated mobility; Artificial intelligence; Predictive motion control; Sensors and control system inputs; Asset Management; Cybersecurity
Big Data and IIoT value; Monitoring Big Data; Robotics safety standards and programming; Learning about PID
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me