Machine Safety: Design a safer machine with risk assessments

Understand why and how to conduct a risk assessment on a machine to improve the design by increasing safety and productivity. Note 6 reasons why to do risk assessments, and 8 steps to conduct a risk assessment.

08/20/2013


Sometimes, old habits are hard to change. What is so difficult about understanding why and how to conduct a risk assessment on a machine? See these six reasons to conduct a risk assessment and eight steps to doing a machine risk assessment.

Let’s start with why risk assessments should be conducted.

Here are six reasons to conduct risk assessments.

  1. It’s simply a good business practice. 
  2. You’re performing your responsibility for due diligence.
  3. Your overall liability as a business is the same, regardless.
  4. It’s part of your existing business safety culture.
  5. Industry consensus standards require risk assessments.
  6. It’s the law – OSHA!

If the above is reasonably clear, doesn’t it seem plausible that everyone would be conducting risk assessments without hesitation? Well, it’s my opinion that old habits are hard to change! Haven’t we all seen situations in recent years where any or all of the example reasons above have either been MIA (missing in action) or just simply misunderstood. Having said that, we’ve also seen numerous case examples of companies considered “best-in-class” incorporating risk assessments into their business. Isn’t this because, in part, they’ve concluded that there is a cost associated with not being best-in-class?

The most frequent excuse I hear from companies not conducting risk assessments is – because risk assessments are added costs to our business. Yet, don’t all six of the reasons above have an avoidable cost associated with them that can shutter a business? Best-in-class companies say: yes!

Secondly, “how” to conduct a risk assessment?

There are several answers to this question. However, it begins with a real simple concept which in my experience is not universally understood. The key word is “process.” A risk assessment is not a snap shot, a check mark, and generally is not a single hazard. There are some folks out there incorporating the new ISO consensus standard, ISO 13849-1; 2008, who mistakenly believe the risk graph in informative annex A is considered a risk assessment. No, this only has to do with the safety-related parts of a control system where a control function is deemed necessary to reduce risk. And, every hazard on a machine isn’t usually mitigated via a control function.

So, a risk assessment is called a process because it takes multiple steps to conduct. Of all the standards, white papers, and training classes I’ve encountered, they all seem to average eight process steps to properly conduct a risk assessment on a machine.

8 steps to properly conduct a machine risk assessment are:

  1. Prepare and research limits of the assessment
  2. Identify all tasks and hazards
  3. Access initial risk(s)
  4. Risk reduction actions
  5. Access residual risk(s)
  6. Acceptability of residual risk(s)
  7. Validate solution(s)
  8. Provide documentation

Therefore, a risk assessment is a process of logical steps designed to systematically identify and evaluate any and all hazards associated with a machine. And, not until any and all hazards are identified via a risk assessment can designs be implemented to mitigate those hazards making it a safer machine.

If all companies understood everything mentioned above, wouldn’t we see a majority of them fully incorporating risk assessment into their businesses as a core function?

Has this presented you with any new perspectives? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



Brad , KY, United States, 12/05/13 06:56 AM:

Good Info.
This should be a monthly column.
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.