Machine Safety: e-stop devices versus safety devices

Safety devices and e-stop machine safety requirements consistently raise questions and merit review. The universal (and global) emergency stop device is not so universally understood. An e-stop is NOT a safeguarding device and certainly an e-stop is NOT a reset button. Review these e-stop device requirements according to machine safety standards.

05/27/2014


Jokab Safety, part of ABB, showed this giant e-stop at a Pack Expo show.Use of e-stops in machine design is one of those things that frequently suggests a refresher understanding might be helpful. The universal (and global) emergency stop device is not so universally understood. An e-stop is NOT a re-set button. So far I have not encountered anyone in industry who ever have considered an emergency stop device as a re-set button. [Some days, I wonder.]

An emergency stop device is well defined as a red button on a yellow background. The time has come again to touch on e-stop device classification according to industry machine safety standards.

In the United States there are two primary machine safety standards that call out requirements for emergency stop devices and their stopping functions. They are ANSI B11.19; 2010 and NFPA 79; 2012. ANSI B11.19, Performance Criteria for Safeguarding in clause 12.9, page 73 reads as follows:

12.9 Emergency stop devices

"Emergency stop devices are not safeguarding devices. They are complementary to the guards, safeguarding devices, awareness barriers, signals and signs, safeguarding methods and safeguarding procedures...."

Types of devices usually covered by the safety standards and used for the emergency stop function can include, but are not limited to, the following:

• Pushbutton-operated devices

• Rope pull (cable pull) operated devices

• Foot-operated device without a mechanical guard

• Disconnect switch actuator

• Rod-operated device

• Push-bar-operated device 

Furthermore, the actuators of emergency stop devices are required to be colored RED, and the background immediately around the actuators are required to be colored YELLOW. This distinctive color combination is globally reserved for emergency stopping devices. NFPA 79, Electrical Standard for Industrial Machinery, also covers the information and requirements listed above along with several international IEC and ISO machine safety standards.

As I’ve discussed this question with other industry experts, in my opinion, the consensus is that safeguarding devices are always exclusively used to achieve a dedicated safety related function. Emergency stopping devices are not considered safeguarding devices because they are complementary devices and because they are not exclusively used to achieve a safety related function.

Please add your comments to this narrative either supporting or dissenting. Add your comments, thoughts, ideas, experiences, and challenges in the comments section below.

Related articles linked at the bottom of this post:

E-Stops aren’t safety devices

Machine Safety: Thinking of bypassing an e-stop? Have you talked to an attorney?

Machine Safety: My main disconnect e-stop isn’t red with a yellow background

Not again – E-Stops do not equal machine safety

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.