Machine Safety: Networks can enable advancements in machine safety

Networks have seen significant advancements over the past 10 years to include safety certified networks. Have these technological achievements really advanced machine safety?

05/06/2014


Courtesy: Control Engineering Machine Safety Blob, JB TitusNetworks have seen significant advancements over the past 10 years to include safety certified networks. Have these technological achievements really advanced machine safety?

My first response is yes. Because safety certified networks have provided the ability to display fault and status diagnostics which in many cases did not previously exist. Here’s the simple explanation. Safety automation can be described as any combination of safety programmable logic controllers (PLCs), safety inputs, safety outputs, safety rated devices, standard devices applied with redundant application, safety certified software, and a safety certified network. Wow! And, all or part of the aforesaid replaces conventional components and point to point wiring.

Ah ha; this is the key! Replacing electro mechanical components, like safety relays and a lot of hard wiring, opens the door for new diagnostics for existing safety functions. That alone, in my opinion, is an advancement in machine safety. These diagnostics provide key information to personnel for minimal trouble shooting time and to correct unplanned machine downtime issues. The control system can then be reset enabling continued production.

And now the next point. If you can connect the safety related parts of the control system via a safety certified network, you now have a fully integrated safety control system. Some advantages of these systems include built in features like:

1. Watch dog timers

2. Diversity of code

3. Data integrity checks

4. Internal health checks with diagnostics, and

5. Component addresses within the control system.

This last item is critically important because even devices in series can now have a physical address for annunciation and trouble shooting. These are but a few of the features, advantages and benefits that safety certified networks bring to machine safety.

Has this presented you with any new perspectives? Do you have some specific topic or interest that we could cover in future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Machine Safety: enhanced safety networks, the Internet of things, and autonomous safety

Machine Safeguarding Solutions, a case study by ARC

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.