Machine Safety - Wired versus Integrated Safety Automation!

As a plant manager does it make any difference to you whether your machines are guarded via wired safety guards or integrated safety automation guards?........You alone own the safety culture of your business.

03/28/2011


As a plant manager does it make any difference to you whether your machines are guarded via wired safety guards or integrated safety automation guards? Are you aware that the machine safety standards have changed allowing the integrated safety choice? Have you had any executive level training on the new safety rated components and their included operator diagnostics? Have you attended any seminars focused at the operational benefits companies have enjoyed as a result of integrated safety automation? If your answer to these questions is generally “no” then it might be a good idea to attend the Control Engineering Integrated Safety Webcast on April 14th at 2:00 PM (EST).

You alone own the safety culture of your business. If your safety practice is stuck in the past – learn about the new choices you have today that might increase your OEE, your productivity, or your company moral. Consider upgrading your safety culture and your safety operating policy. Machine safety is no longer relegated to hard wiring, little to no diagnostics, intermittent downtime, welded contacts, etc. due to directives that required “everything safety shall be hard wired.”

Let’s be fair though because there remains a definite viable choice for hard wiring as a best practice. Such as; small machines, short runs of cables, few components, or no discernable competitive advantage. However, what maintains your machine’s level of safety compliance after its commissioned? In my opinion, there’s only one answer – your “Safety Culture.” Only your safety culture over time will keep those wire terminations tightly secured, replace that control relay immediately when the contacts are welded, and in general keep that machine’s safety compliance honed as it was when it was commissioned. Otherwise, your safety compliance will slowly and quietly degrade over time increasing the potential safety risk.

The “Safety Integration” Webcast on April 14th will help upgrade your thinking and your possibilities for a competitive advantage.

Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety – Wired versus Integrated Safety Automation!

Related articles:

Safety integration webcast: Changing regulations, efficiency, productivity

 

How To Integrate Safety

 

Machine Safety - Hardwired vs Integrated?JB Titus, CFSE

Updating Minds About Machine Safety

Machine safety pays off

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.