Machine vision cuts PV module assembly time

Photovoltaic (PV) assembly is among industries benefitting from a machine-vision enhanced automated soldering system from Mondragon Assembly, to shorten cycle times, ensure consistently high product quality, and enhance equipment usability.

04/23/2012


Mondragon Assembly uses a Cognex In-Sight 5100 intelligent vision system to optimize the process of soldering the cross-links between photovoltaic modules. Courtesy: CognexManufacturers of photovoltaic (PV) modules are using more automation to increase competitiveness. Perfectly soldered joints contribute to the efficiency of PV modules. Consistently high product quality and shorter cycle times lead to a permanent cost reduction. As in other industrial sectors, image processing is becoming an important function for more companies. In a fully automated soldering system from Mondragon Assembly of Stockach, Germany, the intelligent vision system optimizes the process of soldering the cross-links between photovoltaic modules.

Important factors in creating a perfect soldered joint are the largest possible contact area, the high strength of the compound, and a small contact resistance. These three criteria largely determine the conductivity and current flow, thus ensuring a high degree of efficiency in the completed solar module.

Parallel workflow saves time

Before the vision system can set the precise positioning of the soldered joints, the cross-links made of galvanized copper are inserted into the system as approximately 5 mm wide strips. A stretching station prevents formation of wave-shaped and crescent-shaped deformations. Using a pneumatic string cutter, they are cut down to match the typical product specifications. A vacuum pad gripper then successively places the cross-link strips individually on a clipboard, until they form the completed connection diagram of the circuits. Then the cross-links as a whole are in turn transferred by means of pneumatic grippers to the photovoltaic module. This approach offers the advantage of parallel soldering and positioning and thus saves more time.

Soldered joints reliably detected

The process takes place simultaneously on the front and back of the module. On each side, two induction soldering heads equipped with the intelligent vision system move over the work areas. Supported by red dome lighting, they recognize the predefined soldered joints. Simultaneously, the vision systems inspect the individual target positions, which are stored in type-specific recipes. The actual and target positions are compared and the deviation is transmitted to the control. If the tolerance limits have been complied with, the flux material is sprayed on and soldered, whereas rejected sites are reworked manually. The quality inspection of the soldered joints themselves is performed by the automated soldering machine.

Vision accelerates production

With machine vision, Mondragon Assembly achieved cycle times of 80 seconds for cells with three busbars and modules with six strings, much faster than manual production. In addition to the rapid functioning as a stand-alone system, the easy handling of the compact image processing system speeds up equipment use.

Even without detailed knowledge in the field of image processing or programming, it can be configured easily and quickly for pending tasks in production. Using its spreadsheet interface, the implementation of simpler applications can be done especially quickly. Complex applications are solved by powerful vision tools. A wide range of development, management, and monitoring tools is offered by the graphical development platform in the machine-vision software. Based on the familiar Microsoft Windows environment, it provides for shorter development cycles for vision applications, increased functional reliability, and high system flexibility.

Advantage of worldwide availability

Mondragon Assembly also receives global services and logistics. The system is easy to use so even less well-trained employees can operate the equipment without knowledge in the field of image processing systems.

The systems are flexible and can be used as a stand-alone solution, without central control. Use of a central server becomes unnecessary, making is possible to do repair and maintenance work even without specialist IT personnel. In this way, the vision-based soldering system for cross-links of photovoltaic modules ensures especially application-oriented operation, in addition to fast cycle times and consistently high quality in the soldered joints.

- John Lewis is market development manager, Cognex Corp. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering.

www.cognex.com/in-sight

www.mondragon-assembly.com/photovoltaic-technology/?lang=en 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.