Maintaining a user perspective

08/26/2010


Yesterday we posted a commentary by Herman Storey on why end users should care about converging wireless standards. To some his comments may seem controversial, at least within the vendor community. To many users, his thoughts are probably dead-on.

I met Herman a few years ago while he was still with Shell. He was giving a presentation at a Fieldbus Foundation conference. I had been hearing much about wireless instrumentation at the time, and I asked him if he shared the notion that there are all these field devices that users were dying to install if only they could find a practical way to do it. Wireless promised to deliver that answer. His response was that with a few exceptions, most plants he dealt with probably had as much instrumentation installed as they really needed. It might be nice to have a few more measuring points here or there, but no torrent of new equipment. This was a useful reality check.

The value proposition for wireless devices, fieldbus networking, sophisticated asset management, and the like is not the same for every plant. And as Herman points out, the real costs and benefits of a technology like wireless instrumentation go far beyond saving the cost of wiring. There are times when I have a hard time understanding why process industries are so conservative and seem to be terribly slow to adopt technologies that offer much promise. Users have to think in terms that the new gadget that is so enticing today will still need to be running 20 years from now to pay for itself, and that the company that made it better still be in business and supporting it. Such a mindset gives you a very compelling reason to make sure those decisions are made thoughtfully. The cost of getting it wrong can be huge.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.