Maintenance on America is scheduled for Nov. 4

I have railed in the past about the “break-fix” mentality in manufacturing maintenance. The same holds true for the current federal plan, such as it is, to address manufacturing's challenges in the modern world. Break-fix doesn't work in Washington any better than it does on your plant floor.

10/15/2008


I have railed in the past about the “break-fix” mentality in manufacturing maintenance. The same holds true for the current federal plan, such as it is, to address manufacturing's challenges in the modern world. Break-fix doesn't work in Washington any better than it does on your plant floor. If you need proof, check out how the world has changed in the last few months.

What makes it harder is that there isn't one solution to the problem. If you look at one side, they want closed borders and protectionist trade rules. The other side wants more tax incentives for businesses and unfettered free trade. They don't talk much about education, innovation, training and energy modernization as it pertains to manufacturing %%MDASSML%% those issues are way too complex. You'd have to have an actual comprehensive plan to address all those issues at once, one that cut through the rhetoric and the partisan polarization that has gripped our country for the last eight years.

The last eight years are over, finally, and both of the major party candidates have scrambled to wear the mantle of change through the last month of the campaign. Change, it seems, is what we all agree is needed.

The only way to change %%MDASSML%% the way to break out of the break-fix mentality in Washington %%MDASSML%% is to cast a vote on Nov. 4. Failure to participate in this election is like failing to lubricate your bearings %%MDASSML%% you can't blame anyone but yourself when things go wrong. This is your four-year preventive maintenance check-up on the policies and programs that will shape our profession and the world our profession works in for the next four years. Not voting is a run-to-failure strategy, and that doesn't work.

If your vote is cast based on a candidate's race or gender or the number of houses they have or the number of times they've been accused of plagiarism (I think that covers everyone), that's like putting the wrong oil on those bearings. Now more than ever, this must be a reasoned, thoughtful vote.

To that end, we've pulled the candidates' positions on manufacturing issues from their Websites and put them in our Forum section this month for your review. Even that should only be the starting point. This is a time for citizens to look past superficial matters to focus on the essence of a candidate's position on key issues.

We get this chance once every four years, and we at least seem to be getting a little better at this idea of voting %%MDASSML%% but just a little. In 2004, more than 60% of registered Americans voted in the presidential election. That was the highest percentage since 1968, but it still means 40% of our residents sat out the 2004 election.

With less than a month to go before Nov. 4, there's still time to listen and think and talk and discuss and debate and decide. Maintaining democracy, like maintaining your plant, isn't easy. The best in our profession know it's the only way to ensure you get what you want out of your machine.

On Nov. 4, it's time to perform a little scheduled maintenance on America.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.