Pumping pinsProblem: A pin has seized in a flywheel and no amount of work will pull it out. How do I remove the pin?Solution: Drill a #3 hole from the opposite side of the flywheel and tap 1/4-28 thd. Insert a grease zerk and "pump" the pin out safely and quickly. The grease gun generates 2500 psi.Contributor: Tom Goodman, Maintenance Superintendent, Champion Laboratories, Inc., Albion, IL; Tom_Goodman@ Champlabs.com
List of Tips & Tricks
Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!