Managing innovation: Microsoft forum showcases tools, processes for successful product development

If you had an idea for a new product, would you know who to contact about getting it to market? If the answer is no, you're part of the majority of corporate employees. A recent study by New York-based Accenture finds 55 percent of management teams in large corporations profess a commitment to innovation, but only 41 percent are satisfied with the frequency at which they bring innovative ideas ...

11/01/2008


If you had an idea for a new product, would you know who to contact about getting it to market? If the answer is no, you're part of the majority of corporate employees. A recent study by New York-based Accenture finds 55 percent of management teams in large corporations profess a commitment to innovation, but only 41 percent are satisfied with the frequency at which they bring innovative ideas to market. And only 36 percent are satisfied with the time it takes to turn an idea into an actual product.

These numbers prompted Microsoft to launch internal and external initiatives to foster innovation within corporations. They involve development of a formal process and the use of Microsoft technology. All of this was on display at an Innovation Management Forum held in October at Microsoft's Richmond, Wash., headquarters.

In addition to highlighting Microsoft's own innovation platforms, the forum featured diverse speaker presentations that exploded the myths surrounding how to be a consistent innovator.

Daniel Chow, senior executive for process & innovation performance with Accenture, says his study of the innovation process shows industry laggards tend to subscribe to the long-held myth that innovation results from creativity and chaos while leading companies develop the processes, structures, tools, and training necessary to deliver innovation.

Chow points to breakfast food manufacture Kellogg as a leading innovator, noting its executive-level position that is “accountable for enabling and delivering the organization's innovation capabilities, with success being measured by outcome-based metrics.”

A desire to support structured innovation programs underpins Microsoft's efforts in this area, including its sponsorship of the Innovation Management Forum , according to Don Richardson, Microsoft's worldwide solution director for innovation management.

Microsoft's innovation initiatives involve these efforts:

  • Creating IDEAGENCY, an internal organization that Microsoft employees can tap into to shepherd innovative ideas from concept to market;

  • Working with software partners to develop solutions that support innovation processes in vertical industries; and

  • An Innovation Process Management (IPM) initiative that underscores how Microsoft collaboration technology like SharePoint and Microsoft Project can support corporate innovation programs.


Simon Floyd, an innovation strategist with Microsoft, used the forum to demonstrate how a company might tap into Microsoft collaboration tools to develop a formal innovation program. The demonstration started with a fictitious engineer who wanted to develop a ski helmet fitted with a Bluetooth headset, making it easy to contact a rescue party in the event of an accident.

The engineer opens a portal application and enters his idea into a system that his employer, a sporting goods manufacturer, set up for pooling new ideas. The idea is then viewed by a person assigned to sort through the submissions and present promising ideas to upper management. Once an idea is approved, it is passed on to people from other departments—e.g., marketing, purchasing, and manufacturing—who can offer suggestions for improving its potential.

The entire process seeks to ensure the products proposed for development will help companies meet strategic business goals, such as expanding into new markets or increasing the share of an existing market. The key to making this all happen, Floyd says, is ready access to the collaborative technology platform so everyone can contribute to the product development process.

Daniel Rasmus, director of business insight for Microsoft, says processes supported by Microsoft technology help manufacturers “think beyond industrial era economics” when it comes to new product development, which is essential for companies that wish to maintain leadership in the age of global business.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Big Data and IIoT value; Monitoring Big Data; Robotics safety standards and programming; Learning about PID
Motor specification guidelines; Understanding multivariable control; Improving a safety instrumented system; 2017 Engineers' Choice Award Winners
Selecting the best controller from several viewpoints; System integrator advice for the IIoT; TSN and real-time Ethernet; Questions to ask when selecting a VFD; Action items for an aging PLC/DCS
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
click me