Manufacturers’ focus on data centers: Fire and life safety

Designing efficient and effective data centers and mission critical facilities is a top priority for consulting engineers.

01/21/2013


Participants

  • John Kovach, Global Head of Data Center Initiatives, Siemens, Buffalo Grove, Ill.

Fire/Life safety

CSE: What new detection or suppression system, product, or method do you see becoming the most prevalent? Describe a recent project.

Kovach: Very early warning fire detection (VEWFD) is key to minimizing downtime in data centers—a fire can be detected at the very earliest stage. Today’s VEWFD systems tend to be air-aspirating with pipe networks that extend into the protected areas. Leading VEWFD systems such as the VESDA system can sense smoke particles at an obscuration level as low as 0.0015%/ft. This is much lower than the typical spot detector and therefore provides a warning much earlier in the incipient stage of the fire. Until recently, systems such as VESDA were stand-alone products or required multiple relays to communicate with the main fire alarm control panel (FACP). New developments have led to the intelligent high-level interface (HLI) that provides seamless connectivity between the FACP and the VESDA system, providing benefits such as single point of annunciation and control for all VEWFD detectors, reduced installation complexity, reduced equipment costs, reduced installation time, reduced wall space requirements, and the addition of full-event annunciation.

Many benefits emerge from the full-event annunciation available with the HLI. One such benefit includes understanding the nature of a fault, allowing technicians to come to the site prepared with prior knowledge of the nature of the problem, as opposed to a general fault notification from a relay. For example, a technician could determine that a sampling tube was broken due to a high airflow trouble or, conversely, could tell that a tube was blocked due to a low air-flow condition. Such a system was installed recently at a major data center in Massachusetts where significant hours of labor and 452 monitored modules of hardware were saved thanks to the HLI. All these savings were achieved while providing additional critical information to the customer.



Kevin , , 02/08/13 08:55 AM:

A discussion of fire detection and prevention is long overdue as it relates to legacy data centers. Too many modifications such as return air plenums, aisle containment and high density racks deployment have taken place without looking at the effects they have on smoke detection, clean agent concentrations, sprinkler coverage, etc. Early smoke detection (VESDA) in legacy data centers could help with early warning of an event but the effects of containment and other modifications can significantly affect traditional smoke and heat detection which often are used for activation of clean agent and pre-action systems.
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.