Manufacturers’ focus on data centers: HVAC

Designing efficient and effective data centers and mission critical facilities is a top priority for consulting engineers. Manufacturers discuss HVAC systems, cooling systems, and solutions.

01/17/2013


Participants

  • John Collins, Global Segment Director, Data Centers, Eaton Corp., Raleigh-Durham, N.C.
  • Jim Dagley, Vice President, Channel Marketing & Strategy, Johnson Controls Inc., Milwaukee, Wis. 
  • John Kovach, Global Head of Data Center Initiatives, Siemens, Buffalo Grove, Ill.

HVAC

CSE: What HVAC issue comes to the forefront most when you’re supporting engineers designing data centers? How do you help overcome these issues/answer their questions?

Kovach: The typical environmental parameters of temperature, humidity, pressure, and ventilation are a given for every operating condition—normal or abnormal. But what is at the forefront of planning and designing data centers is speed, uptime, redundancy, response time, reaction in normal sequences, and reaction when there is a problem. There is no magic or product that answers all of these challenges. Systems will ultimately only do what they are programmed to do. Thus, every condition, failure, or situation has to be anticipated, talked about, and designed for. That happens with the input from every party involved. The execution depends on the skill of the design team to communicate what is needed and the automation and controls contractor to methodically implement the knowledge into a program. 

Collins: When building new data centers, we are often asked how we can help support maximizing the amount of time the cooling system will operate in economized mode(s). Our focus and expertise in this area is to create predictable airflow patterns and maximize power density in the data hall by taking into account how load profiles will change over time. We also position our approach around giving engineers proven options based on results from similar customer applications and data driven through simulations, such as CFD modeling, when necessary.

Dagley: There are competing schools of thought on direct air cooling versus contained air cooling in data centers. Each can be the preferred choice for various applications, so the specification should be based on the uptime requirements, power density, geographic location, etc., but most importantly on the owner/operator’s needs. It’s important to work with a building controls and integration expert that has had success in implementing both design preferences.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.