Manufacturing technology orders up 108% in 2011

May U.S. manufacturing technology orders have totaled $388.27 million, according to AMTDA and AMT, up 108% compared to 2010.

07/15/2011


May U.S. manufacturing technology orders totaled $388.27 million according to the American Machine Tool Distributors' Association (AMTDA) and the Association for Manufacturing Technology (AMT). This total, as reported by companies participating in the U.S. Manufacturing Technology Orders (USMTO) program, was down 2.6% from April but up 121.3% when compared with the total of $175.46 million reported for May 2010.  With a year-to-date total of  $1,984.87 million, 2011 is up 108.0% compared with 2010.

These numbers and all data in this report are based on the totals of actual data reported by
companies participating in the USMTO program.

“The May order numbers confirm our members’ reports of continued strong project levels by manufacturing companies to improve productivity in their factories,” said Peter Borden, AMTDA President. “The 2,000 unit-per-month level signifies a very healthy demand still in place as we head toward the close of the second quarter.”

The USMTO report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. orders data of domestic and imported machine tools and related equipment. Analysis of manufacturing technology orders provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.

U.S. manufacturing technology orders is also reported on a regional basis for five geographic breakdowns of the United States:

1. Northeast region

At $64.30 million, May manufacturing technology orders in the northeast region were up 8.4% when compared with the $59.33 million total for April and up 88.4% when compared with May a year ago. The year-to-date total of $305.87 million is 92.4% more than the comparable figure for 2010.

2. Southern region

May manufacturing technology orders in the southern region totaled $54.15 million, 5.1% more than April’s $51.52 million and 86.4% more than the May 2010 total. With a year-to-date total of $239.30 million, 2011 is up 56.9% when compared with 2010 at the same time.

3. Midwest region

Midwest region manufacturing technology orders in May stood at $137.62 million, 10.9% more than the April total of $124.14 million and up 232.6% when compared with last May. At $691.81 million, the 2011 year-to-date total is 168.5% more than the comparable figure for 2010.

4. Central region

Manufacturing technology orders in the central region in May totaled $95.18 million, down 21.6% from April’s $121.36 million but up 83.8% when compared with the May 2010 figure. The $551.71 million year-to-date total is 106.6% higher than the total for the same period in 2010.

5. Western region

Western region manufacturing technology orders totaled $37.02 million in May, 12.1% less than the $42.11 million total for April but 93.9% higher than the tally for May 2010. At $196.18 million, 2011 year-to-date is up 66.3% when compared with last year at the same time.

- Edited by Amanda McLeman, Plant Engineering, www.plantengineering.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Controller programming; Safety networks; Enclosure design; Power quality; Safety integrity levels; Increasing process efficiency
Additive manufacturing benefits; HMI and sensor tips; System integrator advice; Innovations from the industry
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me