Market for AMOLED Light-Emitting materials set to surge in 2014

With a flood of new competitors set to initiate or increase the production of active-matrix organic light-emitting diode (AMOLED) panels next year, demand for materials used to make AMOLEDs is forecast to rise by nearly 27 percent in 2014.

01/07/2014


Global Market Forecast for Light-Emitting Materials Used to Manufacture AMOLED Displays (in Millions of US Dollars). Source: IHS, December 2013With a flood of new competitors set to initiate or increase the production of active-matrix organic light-emitting diode (AMOLED) panels next year, demand for materials used to make AMOLEDs is forecast  to rise by nearly 27 percent in 2014.

The global market for AMOLED light-emitting materials will expand to $445 million in 2014, up from $350 million this year, according to the new report entitled “Display Materials and Components Report – AMOLED Light-Emitting Material – 2014” from IHS Inc. While growth next year will moderate compared to the 49 percent rise in 2013, the market will swell by about $100 million in 2014, as presented in the attached figure.

“South Korea’s Samsung Display Co. Ltd. has successfully pioneered the AMOLED business during the last five years, attaining major success in the market for smartphone panels ranging in size from 3-inches to 5-inches,” said Doo Kim, principal analyst, display component and materials research. “Now other panel manufacturers are seeking to cash in on the expanding demand for AMOLEDs in smartphone, televisions and other products. This phenomenon will spur the continued increase in sales of materials used to create AMOLEDs in 2014.”

The organic light-emitting materials utilized in AMOLED panels can be largely divided into two categories: common functional layer materials and color-emitting materials.

The common layer materials include hole transport layer (HTL), hole injection layer (HIL), electron transport layer (ETL), electron injection layer (EIL), capping layer (CPL), charged generation layer (CGL), electron blocking layer (EBL), efficiency enhanced layer (EEL) and RGB prime layer materials.

Of these, the EBL and EEL materials are hardly used at this time, while the CGL material is used only in white organic light-emitting diode (WOLED) panels.

Materials such as PIN dopant are also adopted to improve efficiency.

The color-emitting materials are red, green and blue host and dopant materials. Yellow-green materials are used in WOLED.

Samsung Display started the AMOLED market when it commenced large-scale mass production in 2008. Since then, it has led the AMOLED market’s expansion.

In 2013, LG Display Co. Ltd. of South Korea launched a WOLED TV panel and a flexible AMOLED panel. Meanwhile, AU Optronics Corp. (AUO) of Taiwan introduced samples of small- to medium-sized AMOLED panels.

Next year, LG, AUO and Japan Display Inc. are poised to commence or increase AMOLED panel production. As a result, light-emitting material makers are expected to compete in a more diverse market environment with increased demand and a broader base of customers. This will represent a marked change from the last five years, when they depended wholly on demand from Samsung Display.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.