Metalforming business seen slowing, PMA report says

Metalforming companies anticipate a dip in business during the next three months, according to the April 2012 Precision Metalforming Association Business Conditions Report.

04/20/2012


Metalforming companies anticipate a dip in business during the next three months, according to the April 2012 Precision Metalforming Association Business Conditions Report, The monthly report samples 129 metalforming companies in the United States and Canada.

Metalforming, Courtesy: Gilchrist Metal FabricatingThe April report shows that 37% of participants expect economic activity to improve during the next three months (down from 46% in March), 51% predict that activity will remain unchanged (compared to 49% last month) and 12% report that activity will decline (up from 5% in March).

“The strength of PMA member expectations for the general economy and specifically for shipping levels and incoming orders for the next three months softened somewhat in the April PMA Business Conditions Report,” said William E. Gaskin, PMA president. “However, expectations thus far in 2012 are significantly higher than expectations in all but the first quarter of 2011.

“Uncertainty over the strength of the economic recovery, the unsettled political situation brought on by election-year politics, and the increasing difficulty being experienced by many companies in hiring skilled workers, all are conspiring to soften what continues to be a very strong recovery in the metalforming sector,” Gaskin added. “This recovery is consistent with the overall rebound in manufacturing that has been widely reported in the automotive, agriculture, off-highway, medical equipment and other sectors.”

Metalforming companies also anticipate a downward trend in incoming orders during the next three months, with 43% forecasting an increase in orders (compared to 47% in March), 41% expecting no change (down from 47% in March) and 16% predicting a decrease in orders (up from only 6% last month).

Average daily shipping levels declined in April. Only 46% of participants report that shipping levels are above levels of three months ago (down from 53% in March), 41% report that shipping levels are the same as three months ago (compared to 37% last month), and 13% report a decrease in shipping levels (up from 10% in March).

The percentage of metalforming companies with a portion of their workforce on short time or layoff increased to 9% in April, from 7% in March. However, this number is lower than April 2011, when managers reported 11% of their workforce on short time or layoff



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.