Micro proportional driver

Youngstown, O.— The Block Micro Proportional Driver (MPD) is designed as a full-featured, all-in-one driver. The device is used to control the flow of air or liquids through proportional solenoid valves. While this driver offers an array of adjustments, its palm-sized configuration is said to make it ideal for any size application.

By Staff March 1, 2002

Youngstown, O.— The Block Micro Proportional Driver (MPD) is designed as a full-featured, all-in-one driver. The device is used to control the flow of air or liquids through proportional solenoid valves. While this driver offers an array of adjustments, its palm-sized configuration is said to make it ideal for any size application. The MPD also features epoxy encapsulation for protection of the embedded electronics, true sine wave dithering for finer control with less wear and tear on equipment, and a 5V built-in reference voltage. It also features six multi-adjustments including minimum current, maximum current, ramp up, ramp down, dither amplitude, and dither frequency. The MPD is available in both high-resolution and standard versions and includes integrated red and yellow LEDs to aid in troubleshooting. www.canfieldconnector.com Canfield Connector