Military transportation robot Part 2: Who drives? Who's the best gamer?

10/24/2010


Unmodified Autonomous R-Gator - Source: John DeereMTRMS: A new class of robot is joining the troops on the front lines, it is known as Military Transportation Robot, Medium Size (MTRMS ). Robots smaller have been in use for several years, larger ones are in the planning stage which is what makes the R-Gator a Medium size military robot. Who gets to drive when it's not in full autonomous mode? Who's the best gamer? (See below.)

The picture above is what the stock R-Gator, fresh off the Charlotte, North Carolina assembly line, looks like.  It can drive itself autonomously.

THE R-GATOR IN THE BROCHURE, $350K

The stock R-Gator, built to the specifications in the brochure [see here:

http://www.deere.com/en_US/contractsales/fedmilitarysales/cce/r_gator/r_gator.html], costs government agencies $350,000 and is considered a COTS vehicle.  If you would like to see it in action, your best bet is to travel to one of the conventions, trade shows, or field events where R-Gator is being demonstrated.  Contact Mark E. Bodwell at (919) 804-2251.

BodwellMarkE(at)JohnDeere.com for the schedule of upcoming R-Gator demonstrations.

The published R-Gator speed is 35 mph, in Manual Mode.  In Full-Auto Mode, the R-Gator is limited to 5 mph.  For comparison John Deere agricultural tractors are limited to 18 mph in Full-Auto and the Google Autonomous Car [See

http://news.yahoo.com/video/tech-15749651/test-driving-the-google-car-22403930 ], travels at normal highway speed, 70 mph, in Full-Auto Mode.

SENSORS AND SERVOS

Speed, direction of travel, and position within 4 inches are determined by NavCom GPS, inertial navigation, and precision odometry.  Positive and negative obstacles such as holes and cliffs are avoided by using two forward, one rear looking SICK laser range sensors.  The SICK lasers produce a planar laser fan that can “broom” the area ahead of the vehicle as it moves.

The electric rack and pinion power steering used on the R-Gator is from John Deere’s golf course greens mower.  The engine is a 25 hp diesel; liquid-cooled, running on JP-8 fuel, connected to a Continuously Variable Transmission (CVT), much like on a golf cart or snow mobile.  The 5 gallon tank gives the vehicle a 300 mile range which implies a fuel efficiency of 56 miles per gallon, not bad for a four wheel drive vehicle.

Using what customers already know makes big difference in training time.

Marks job is to build business relationships with the Soldiers, Sailors, Marines, and Airmen who use John Deere military products every day.  Their comments and suggestions guide John Deere in developing improved military ground vehicles.  To do this Mark travels extensively putting on demonstrations and leading training exercises with his JP-8 fueled diesel R-Gator.  JP-8 is the universal fuel used for everything the US Army owns, trucks, tanks, helicopters, generators, and now R-Gators.

In the telephone interview, Mark Bodwell explained: “Training with the early ‘Engineer Interface’ overloaded the 17 to 20 year olds learning to operate the R-Gator and took 3 weeks to accomplish the training.  When leading the training at Ft. Benning I noticed that in their off time the soldiers were experts at playing Halo and America’s Army using the X-Box controller.  When we adopted the X-Box controller for tele-operation of the R-Gator it changed the character of the training from intensive study to play.  Now for training all I do is ask the squad ‘Who is your best gamer?’ they point and I toss the controller to that person.  In 30 minutes or less they have the R-Gator up and running.”

I will be tracking down the details of the electric power steering system in R-Gator Part 3. Read Part 1 and see more photos:

John Deere’s Robot Gator – Part 1 - revolutionary change

Pass along the link to other interested in roving robots:

http://www.controleng.com/blogs/aiming-for-automated-vehicles/blog/john-deeres-robot-gator-part-1-revolutionary-change/d864d4cade.html

GO ROBOTS !

Paul F. Grayson - Chief Engineer, AMERICAN INDUSTRIAL MAGIC, LLC

"Small engine and machinery repair"

TC TINKERS 4-H ROBOT CLUB "Science, Engineering, and Technology"

390 4-Mile Rd. S., Traverse City, MI 49685

(231) 883-4463 Cell

pgrayson(at)aimagic.org

AIM: http://aimagic.org

TC Tinkers 4-H Robot Club:

http://tech.groups.yahoo.com/group/TC_TINKERS_4-H_Robot_Club/

groups.yahoo.com/group/TC_TINKERS_4-H_Robot_Club/join



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.