Model 940 PositionServo requires no enclosure

Lenze/AC Technology Corp. Unlike most servo products, the Model 940 from Lenze/AC Technology Corp. combines many technological advances in a standard product. It has standard TCP/IP protocol so drives can talk with each other and any standard Ethernet device; EPM, a removable memory module with drive programs, can be moved from drive to drive; multiple motor technologies to run synchronous brus...

By Staff April 1, 2007


Lenze/AC Technology Corp.

Unlike most servo products, the Model 940 from Lenze/AC Technology Corp. combines many technological advances in a standard product. It has standard TCP/IP protocol so drives can talk with each other and any standard Ethernet device; EPM, a removable memory module with drive programs, can be moved from drive to drive; multiple motor technologies to run synchronous brushless servo and asynchronous inverter motors; and auto-tuning. Multiple motor vendors’ data files are available, for “select and go” operation. Result is that a mechanical engineer can program complicated motion profiles without being a programmer. The standard drive that goes up to 18 A continuous and can take up to 480 V ac. www.actech.com