Modern nuclear technology for new plant

The NRC has approved plans for the first new nuke plant since 1978, using Generation III+ technology.

02/10/2012


NRC grants permission for Southern Co. Vogtle nuclear generating plant expansionThe hand wringing has started in earnest as the NRC has granted permission for Southern Co. to add two more units to its Vogtle nuclear plant site in Georgia. “Haven’t we learned anything from Fukushima?” the chorus asks.

  The answer to that is yes, we have learned a great deal, not just from Fukushima (other than maybe we don’t want to locate plants right on the coast) but from all the nuke plants around the world. Here’s an analogy: Let’s say you want to buy a new car, but your friend says cars aren’t safe based on the fact that his aunt was killed in a crash in a 1967 Plymouth. What would you say in response to that? You could legitimately make the point that cars have changed a great deal since then. Accident information collected over the years has guided technical improvements, like airbags, that make today’s cars much safer.

  Such is the case with nuclear reactors. The new units proposed for Georgia will use Westinghouse AP1000 reactors, which are billed as Generation III+ technology using many safety improvements compared to those designed and built 30 or 40 years ago. This reactor is also a modular design to cut construction costs. To make a specific and very relevant connection to Fukushima, once the tsunami hit and those plants went dark, there was no power available to run cooling pumps, which was a serious problem. The AP1000 has a passive cooling system that can operate via gravity and convection without needing power. Lesson learned.

  Of course there are lots of those old nuke plants still running which need upgrades. Many have already been improved, but there is more to do.

Peter Welander, CFE Media, Control Engineering, Pillar to Post blog  Others detractors suggest that those new plants aren’t necessary, particularly with natural gas so cheap. Yes, it’s cheap today, but what happens if fracking is banned for various environmental reasons? That idea has been seriously suggested. Nuke plants look to the very long term, and they are 24/7 base loaded facilities. I don’t know enough about Southern Co’s generating fleet, but maybe these new reactors could create room to retire older coal burners.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.