More interoperability, less effort

Think Again: Highest level of interoperability includes the capability to plug in a device and—without additional configuration—have it do what it’s supposed to do. Standards, industry organizations, certifications, and a variety of organizations profess plug-and-play interoperability as a goal.

05/01/2008


ONLINE extra

Read more about interoperability.

Highest level of interoperability includes the capability to plug in a device and—without additional configuration—have it do what it’s supposed to do. Standards, industry organizations, certifications, and a variety of organizations profess plug-and-play interoperability as a goal.

With automation, controls, instrumentation, and enough system integration, almost anything can be made to connect and at least communicate at some level. Most people would rather spend time or effort adding value in other ways, hoping equipment and device manufacturers will help them avoid the plug-and- pray scenarios of the past. And it’s happening:

  • ISA88 Part 5 . Interoperability continues to be a key issue for participants working to create the Make2Pack ISA88 Part 5 standard, which aims to improve connections among batch, process, and discrete controls, as well as to expand the scalability and reuse of embedded programming. A tabletop equipment demonstration at a recent meeting showed controllers, two conveyors, photoelectric sensors, safety interlocks, terminal blocks, and an HMI interface using the latest in Part 5 thinking. “Interoperability is the hope,” according to David Chappell, Part 5 chairman, who discusses these points and others in the Standard profits: Make2Pack and ISA88 blog, accessible at www.controleng.com .

  • Industrial networks . Fieldbus Foundation, kicking off its Americas seminar series, made it a point to note that its “Registration” effort aims to ensure interoperability among devices and hosts. (Read more about network certification, p. 54.) Easy to use will be more important; colleges now contain just one-third of the projected demand for engineers to replace pending retirements, says Chuck Carter, principle investigator/center director, Fieldbus Center at Lee College.

  • Software . OPC Foundation is working with system integrators and distributors to ensure implementations meet specifications. The foundation also works with test labs to “to ensure top product quality and reliability, particularly for OPC Unified Architecture components,” says Thomas J. Burke, OPC president and executive director.

  • Programming . Work by PLCopen and others on an XML schemas aims to create real IEC 61131-3 interoperable code among PLCs and in other areas.

Plug and play allows everyone involved to add value—beyond just making something do what it’s supposed to do in the first place.

MHoske@cfemedia.com


ONLINE extra on interoperability

Think Again question: Does interoperability matter enough to you to specify compliance with specific standards in your requests for proposals to vendors? Please comment using the tool below.

 

Related reading

Beyond networks: Optimize information use, Fieldbus Foundation says

 

Better OPC interoperability: Help for system integrators

 

Real interoperability? PLCopen revives TC6 - XML for better translation


Closing the Skills Gap: Programs designed to inspire the next generation of engineers ensure that fresh talent is ready to work as today’s engineers begin to retire.


OMAC: Open technologies, sharing best practices help integrate discrete, process manufacturing


Why are we doing this? Greater efficiency

Think Again: Easier connectedness


Think Again: Comply or die





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.