Motion control market revenues reached $12.2 billion in 2013

According to an IHS study on the market for motion controls, strong growth is forecast to return to the market in 2014, propelling market revenues to a new record high by the end of the year.

01/10/2014


Global sales of motion control products recovered in 2013 to reach $12.2 billion, but growth was far too weak to overcome the 2012 market declines, leaving market revenues well below the peak level reached in 2011. According to an IHS study on the market for motion controls, strong growth is forecast to return to the market in 2014, propelling market revenues to a new record high by the end of the year.

The world market for motion controls. Source: IHS Inc.The motion control market reached a record level of $13.2 billion in 2011 following two years of market growth in excess of 20%. In 2012, the motion-control market suffered from the poor economic situation in the Eurozone, a weak semiconductor market in Japan, and the fallout from overproduction in China. Market revenues declined in all three of these regions, and the global motion-control market decreased by 8.3%. Conversely, the American market provided a bright spot for motion controls, growing over 5% in 2012.

When finalized, the results for 2013 are expected to reveal another year of subdued growth. Stable industries like packaging, materials handling, and food, beverage and tobacco continue to propel growth in machinery production and correspondingly, the motion-control market. However, motion-control sales have been constrained in 2013 by the market’s dependence on volatile industries like semiconductor, machine tool, and robotics, which are known for their cyclic growth patterns. Large declines in these industries in 2009 contributed significantly to the severe decline in the motion-control market that year, and high growth in these industries in 2010 and 2011 boosted the post-recession recovery of the motion-control market.

In 2013, machinery production declined at the global level for the semiconductor and robotics industries and grew very little in the machine tool industry, according to the latest research from IHS on machinery production. Combined, these three industries account for approximately 50% of revenues in the motion-control market, while the more stable industries like packaging, materials handling, and food and beverage account for only 16% of market revenues. Still, the motion-control market is estimated to have grown between 1.8% in 2013, as small declines in the machine tools and semiconductor machinery sectors were offset by growth in the rest of the motion-control market.

The outlook for 2014 is more optimistic.  In the Eurozone, GDP growth is expected to accelerate and renewed confidence should spur  investment in machinery upgrades, leading to an increase in motion control sales. In the Americas, recovery of the semiconductor machinery market will boost growth of motion control revenues in 2014, while in Asia, the machine tool market is forecast to recover.  Globally, the motion-control market is forecast to grow by over 8% to reach $13.3 billion in 2014, exceeding the 2011 record value by 0.6%.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.