Motion, vision: DARPA Challenge teams advance; June safety assessment

Continuing to advance control engineering technologies such as motors, motion control, machine vision, advanced sensing, and networking, the Defense Advanced Research Projects Agency (DARPA) says 53 of the initial 89 teams will move to the next stage in the selection process for DARPA’s Urban Challenge.

06/01/2007


Continuing to advance control engineering technologies such as motors, motion control, machine vision, advanced sensing, and networking, the Defense Advanced Research Projects Agency (DARPA) says 53 of the initial 89 teams will move to the next stage in the selection process for DARPA’s Urban Challenge. In June, DARPA personnel will conduct U.S. site visit tests to assess the ability of each team’s autonomous vehicle to operate safely.

The 53 vehicles will be evaluated on their ability to navigate a test course that includes a four-way intersection and moving traffic, DARPA explained. “We have seen a dramatic increase in vehicle capabilities since the first Grand Challenge,” observed DARPA director, Dr. Tony Tether, who adds: “The ingenuity and dedication of these teams and the growth of the community in this area are phenomenal.”

DARPA will use the site visit evaluation to select the top 30 teams that will participate in the National Qualification Event (NQE), Oct. 21-31. This list of semi-finalists and the location of the NQE and Urban Challenge will be announced on Aug. 10, 2007. The DARPA Grand Challenge Web site lists teams selected for site visits with other updates related to Urban Challenge.

The Urban Challenge, set for November 3, 2007, will feature autonomous ground vehicles executing simulated military supply missions in a mock urban area. Safe operation in traffic is essential to plans to use autonomous ground vehicles to conduct important missions and keep American personnel out of harm’s way. DARPA will award $2 million, $1 million and $500,000 awards to the top three finishers that complete the course within the six-hour time limit.

“We are requiring more and more complex behaviors at each stage,” says Dr. Norman Whitaker, program manager. “Site visits will be the first real test with moving traffic.” The Urban Challenge is the third in a series of DARPA-sponsored competitions to foster the development of robotic ground vehicle technology without a human operator, designed for use on the battlefield.

The inaugural Grand Challenge was held in March 2004 over a 142-mile desert course. Fifteen autonomous ground vehicles started but none finished. In October 2005 at the second Grand Challenge, four vehicles successfully completed a 132-mile desert route. DARPA awarded a $2 million prize to “Stanley” from Stanford University.

www.darpa.mil/grandchallenge





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.