Moving from predictive maintenance to a condition-based program

Evaluate the equipment’s effectiveness by how it’s doing, not how old it is

03/12/2014


Since the dawn of the mechanical revolution, companies have been searching for ways to manufacture more for less. In the past 20 years companies have shifted from the “more is better” concept to “how can we be more profitable with what we have?” How can we reduce costly downtime losses and increase the profitability of the manufactured product? One fact that cannot be avoided with manufacturing machines, assembly lines, production equipment and tools is the need to be maintained in order to remain in good working condition. 

In the beginning, there were preventive maintenance (PM). And PMs were good. Every week, month or year, a task was put into place that would improve the longevity of the machine, reduce the likelihood of a failure, and result in fewer money-grabbing breakdowns. Sounds great, right? But those regular, scheduled PMs come with a price tag of their own. Each time a task is performed, such as a filter changed, a pump or motor overhauled, or bearings lubricated, money is spent on replacement components, man hours, and often done during the available production time to perform the actions. 

Predictive Maintenance (PdM) is a step up on the maintenance pyramid from preventive maintenance toward improved efficiency. Within the PdM strategy is the practice of Condition Based Maintenance (CBM). The concept here is to look, listen and feel the machines to know what needs to have service work and when. This does not mean wait until it breaks and fix it. What it does mean is to collect data while the equipment is running, establish threshold limits either from OEM information, vendors, or best practices, and schedule the maintenance activities accordingly. 

By doing so you will keep your finger on the pulse of the equipment and allow the maintenance staff to make sound judgments on when and what needs to be done. Now you are doing filter changes when the data says they need to be changed. Now pumps or motors are overhauled based on performance criteria and bearings are lubricated based on duty cycle. More advanced phases of CBM may warrant use of specialized predictive tools such as tribology, thermography and vibration monitoring. But don’t let those big words and expensive technologies get in the way of a basic CBM program.  

Changing from a task-based PM program to a CBM program may be easier than you think. Many companies are bound to schedules. People like schedules because they help them to know when and where they should be. The key is to alter the task of the PM. Keep the PM but change it from performing the costly task into a simple inspection. Instead of changing a filter just because it is the first of the month, record the filter differential pressure gauge value and compare it to an established acceptable limit. That monthly filter change might not need to be changed for another two or three months. 

Finding the key indicators that are linked to machine failures becomes intriguing. Once you establish a few key point indicators that identify preventive maintenance tasks, you cannot help yourself from looking for more. Simple temperature measurements or electrical current monitoring are easy ways to identify service-related events. 

Using CBM strategy is a easy way to convert from time-based to counter-based maintenance. With this technique, where applicable, you can keep the maintenance costs aligned with the production cost (especially in cases of production slow-down). Look for ways to count machine cycles while it is actually running, or an hour meter correlated to a laser flash lamp. 

Add a pneumatic counter to a cylinder stroke and you have instant base intervals to establish a CBM process. Record those intervals and the applicable data in your company’s CMMS system or even a log book if that is all you have. Set limits for how much is enough before performing a specific PM task. 

In no time, you will transition from a task-based PM program to an inspection-based program utilizing CBM practice to identify what needs to be scheduled and which tasks are not yet ready to be performed. Changing from a task-based PM program to a CBM program will enable you to maintain your equipment in good working condition with fewer disruptions and at a lower cost.

Monroe Blanton is a reliability technician with Life Cycle Engineering (LCE). Monroe has more than 33 years of experience in engineering installations, maintenance and repair. You can reach Monroe at mblanton@LCE.com. 

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.