Multi-axis servo drive has Ethernet interface

AX2500 Series servo drive now has Ethernet interface. Model AX25xx-B900 is fully software compatible with the AX2000 Series and provides maximum output in a small space—suitable for control cabinets as small as 300-mm deep.

By Control Engineering Staff June 13, 2005

AX2500 Series servo drive now has Ethernet interface. Model AX25xx-B900 is fully software compatible with the AX2000 Series and provides maximum output in a small space—suitable for control cabinets as small as 300-mm deep. Multi-axis system can control up to eight axes, a master module with seven axis modules. Modular concept reduces wiring, commissioning, and installation efforts. Master contains the power supply, input cable filtering for supply power and auxiliary voltage, an internal regen ballast circuit and resistor, and a power output stage. Addi-tional modules are simply plugged into the master and connected in the intermediate dc circuit via a socket strip.

www.beckhoffautomation.com

Beckhoff Automation