Multi-touch improves data analysis

Multi-touch technologies have rapidly moved from the commercial to the industrial sector where they are being used to enhance data analysis.

By Steve Byrom January 13, 2014

Multi-touch technology is rapidly migrating from smartphones and tablet computers to industrial automation. One of the main reasons for this trend is that recent studies suggest that an operator accustomed to the technique can manipulate information on a screen much faster than when using a conventional keyboard and mouse combination.

In addition, multi-touch technology has almost universal familiarity due to the proliferation and widespread use of smartphones, tablet computers, and other handheld electronic devices (Figure 1). Therefore, little or no training is required to introduce multi-touch to industrial plants and processes, resulting in quick adoption and immediate gains in productivity and effectiveness.

One of the main responsibilities of plant operators and other personnel is data analysis, and this discussion will show how multi-touch technologies can be used to improve the performance of this and related tasks.

Single-touch technologies can’t keep pace

Industrial manufacturing and test facilities often find themselves drowning in data, and struggling to use this data in meaningful ways to improve operations. One of the main ways that this information is viewed and analyzed is through data acquisition and control systems. These systems use color graphical displays to allow operators and other plant personnel to view process data, and to control equipment or processes. More advanced systems can securely save data for viewing on demand, particularly useful for review of historical data with comparisons to present conditions.

Modern data acquisition and control systems replace old recording technologies such as pen and ink chart recorders, or supplement the functions of plant-wide automation systems. The latest products benefit from secure high-capacity data storage, able to save months or even years of historical data within the device. Operators can view and study this data without having to use a separate PC and special software.

Although data measurement and recording techniques have improved dramatically over the years, producing greater amounts of useful data, analysis techniques and operator interface technologies haven’t fully kept pace.

Traditional screen navigation techniques such as a mouse and keyboard have proven to be an inefficient way to view and analyze large amounts of data. Touchscreens have been used for many years now and are an improvement, but most employ single-point technologies that only allow an operator to touch and manipulate a single screen object. In many cases, a single touch will then activate a function or select a menu to move to a more detailed screen, with multiple touches often required for even relatively simple tasks.

Although a well-designed touchscreen interface allows for faster direct-selection of menu icons and other items than is possible with a mouse and keyboard, systems that produce a large amount of historical data still require the operator to constantly tap or touch a screen control to navigate to an area of interest. But a better method is at hand, and is now available in leading data acquisition systems and other related products.   

Multi-touch takes charge

Some studies have characterized multi-touch screen manipulation as three times faster than with a keyboard and pointing device. This allows operators and other plant personnel to find, view, and analyze the data of interest much more quickly. These and other benefits of multi-touch for data analysis are listed in Table 1 and described in detail below.

A two-point touchscreen supports swipe and pinch operations. With a single finger, an operator can swipe a trend screen and traverse across the horizontal time scale until a particular area of interest is reached (Figure 2). He or she can then use two fingers to pinch the screen in or out to compress or expand the time scale (Figure 3). This allows trend data to be examined quickly in an overview fashion, and then investigated in detail.

An operator can also rapidly scroll through historical trend text-based data by swiping the screen, in the same manner that he or she would scroll rapidly through a contact list on a smartphone. In many cases, this is a much faster way of finding data than the traditional method of typing letters or numbers and performing a search function.

Another productivity enhancing feature is the ability to add short handwritten notes and symbols directly on a trend display or other screen with a stylus, or even with a finger. One simply presses a finger to the screen and writes a note or creates a symbol, similar to finger painting.

As a matter of fact, the entire user experience with a multi-touch product suddenly becomes very familiar since operators are already interfacing to their smartphones and tablet devices in much the same manner. This reduces the learning curve required to master the operation of a new data acquisition product, while at the same time encouraging the use of features tailored around optimal touchscreen navigation. Finally, multi-touch imparts a fun-factor to routine tasks and operations, increasing operator involvement and productivity.

But as with all new technologies, there are some caveats that must be examined prior to implementation.

Garbage in, garbage out

Any data being analyzed must be accurate, reliable, and trusted. Once trusted data is available, it must be delivered to the viewing device at intervals frequent enough for meaningful analysis. Large amounts of data also need to be stored and easily compared to current operations as this greatly improves analysis.

Poorly executed application software written to use multi-touch techniques will cause problems for users. Operators will approach an application with immediate expectations of how it is supposed to work. If it doesn’t perform the way they expect, users will lose engagement quickly.

Although multi-touch improves the productivity of many operation interactions, single-touch on-screen keyboards and pointing devices still have their place. For example, scrolling through a list of up to hundreds of variables is generally faster with multi-touch, but searching a database with thousands of entries will usually be quicker with traditional type and search.

Best results in terms of high productivity and ease-of-use will continue to be found through a judicious combination of multi-touch and single-touch technologies, so both should be supported, as in the following application examples.

Bringing multi-touch to life

A practical example of the advantages of multi-touch and other technologies for data analysis is a panel-mount data acquisition station (Figure 4). Its mission in life is to measure process signals with high accuracy and repeatability, and to provide clear visualization of this data to operators. Abundant and secure local data storage is a must for future data review and analysis. Last but not least, the station must support easy data transfer to the PC environment, so that data can be permanently stored and, in some cases, further analyzed.

The most advanced data acquisition stations are fully integrated devices offering a long list of premium functionality such as modular universal inputs, SD card flash memory, and USB portable media support, topped off with a very familiar-feeling touchscreen operator interface. Intuitive color graphics present information clearly, with single- and multi-touch operations available for all settings and data display navigation.

Operators can watch a single overview screen showing all channel data, and then touch any channel in an alarm condition to jump to a more informative trend screen. On this real-time trend screen, a simple swipe will replay recent historical trend data leading up to the alarm, during, and after the event, with min/max data indicated. Another touch and swipe action takes the operator to deeper historical data. This no-compromise performance is a requirement for many applications, made easier thanks to multi-touch technology.

The full depth of trend history, including hours, days, or even months, is available in this manner. Add standard Ethernet connectivity that allows data monitoring using a Web browser, e-mail messaging, and other convenience functions—and these advanced data acquisition platforms offer the user a very powerful alternative to complex software-based data acquisition platforms employing older single-touch screen interactions.

In one application in a heat-treat shop, a paper trend chart captured data that proved furnace temperatures were in specification during each product heat cycle. Operators would handwrite batch and other text information on the chart, associating each product batch with the temperature data.

To meet the latest quality standards for this industry and improve operator productivity, a digital electronic recording system was installed to acquire, store, and produce secure, tamper-resistant data files containing traceable batch and temperature data. A new data acquisition station was implemented with a touchscreen operator interface to fulfill these requirements.

The station allows the operator to see the precise temperature data on graphical displays, and to scroll through historical trend data by simply swiping backwards on the real-time trend display. He or she can also quickly input important text information with the touchscreen keyboard, or handwrite messages using a stylus. Data input is now performed with much greater speed and accuracy, and an audit trail is established that links the responsible operator with the batch record. 

Multi-touch technology has enabled smartphones and handheld tablets to change the way people communicate, navigate the Internet, and interact with the countless applications they use on an everyday basis. This technology has brought the same level of convenience and intuitive feel to specialized data acquisition and control products.

Clever design of plant data acquisition and other systems that takes full advantage of multi-touch technology, and the deployment of specialized apps in smartphones and tablets that support these products, are changing the way operators interact with and interpret plant information.     

Steve Byrom is data acquisition product manager for Yokogawa Corporation of America.

ONLINE

www.yokogawa.com/us

Subscribe to the Information Control eNewsletter at www.controleng.com/newsletters

See a related article on multi-touch technology below.

Key concepts:

  • Multi-touch techniques can be much faster than traditional methods for manipulation and analysis of large amounts of data.
  • These techniques minimize the need for training given the familiarity users have gained using consumer electronic devices.