NEBB appoints director of technical services

Tom Meyer, a veteran with more than 25 years of hydronics experience, will be responsible for the quality of NEBB's technical programs as its director.

02/28/2012


Tom Meyer, a veteran with more than 25 years of hydronics experience, will be responsible for the quality of NEBB's technical programs as Director. Courtesy: NEBBThe National Environmental Balancing Bureau (NEBB) has appointed Tom Meyer as the Director of Technical Services. As the association’s technical expert, Meyer will be responsible for the quality of NEBB’s technical programs, including publications, training, education, advising and testing content.

Meyer has more than 25 years of experience in hydronics. Prior to joining NEBB, he was the Director of Government and Professional Affairs for the ESCO Group. He is a past president of Precision Hydronics Corporation, an international hydronics design, consulting and training firm. He was also the founding Executive Director of the Green Mechanical Council and was formerly the President of Praxis Green Inc.

Tom co-authored the new Residential Building Code for Kuwait, which was passed into law this year, and he taught the new Code to Kuwait government engineers at the University of Kuwait. He also was an advisor and project coordinator for the Office of the Architect of the Capitol in Washington, D.C.

Meyer is a member of the High Performance Building Council, High Performance Building Congressional Caucus Coalition, International Association of Plumbing and Mechanical Officials (IAPMO) Green Technical Committee, and is HVAC Chair of the IAPMO Green Technical Committee. 

Tom graduated from the Ohio State University. He has the following credentials: 

  • DES - Designer of Engineered Systems (State of Wisconsin)  
  • CSME - Certified Subject Matter Expert - Hydronics (HVAC Excellence)
  • GGP - Green Globes Professional (GBI)
  • CBCP - Certified Building Commissioning Professional (Association of Energy Engineers)
  • QCxP - Qualified Commissioning Professional (University of Wisconsin)
  • EBCP - Existing Building Commissioning Professional (Association of Energy Engineers)

Meyer is also a member of the following ASHRAE Committees:

  • SSPC 134 – Graphic Symbols for HVAC and Refrigerating Systems Standard – Chair
  • TC07.04 – Energy Analysis for Sustainable Buildings - Chair
  • STDS-SGPC 0 – The Commissioning Process Standard – Vice Chair
  • MTG.BPM – Building Performance Metrics – Member
  • SSPC 90.2 – Energy-Efficient Design of Low-Rise Residential Building Standard - Member
  • TC06.06 – Radiant Heating and Cooling - Corresponding Member
  • Best Practices for Commercial Buildings – Energy Subcommittee

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.