Next-gen DCS doubles as control system and “information hub”

Yokogawa Electric Corp. says the next generation of its CENTUM distributed control system (DCS) illustrates how the DCS is evolving from a single-purpose tool for managing production processes to take on the dual role of plant information hub. The next-generation Yokogawa DCS, dubbed CENTUM VP, is scheduled for release mid-June.

06/01/2008


Yokogawa Electric Corp. says the next generation of its CENTUM distributed control system (DCS) illustrates how the DCS is evolving from a single-purpose tool for managing production processes to take on the dual role of plant information hub.

The next-generation Yokogawa DCS, dubbed CENTUM VP, is scheduled for release mid-June.

The new system's design is a response to customers' desire to have control systems bring in data from more sources within the plant, according to Steve Lazok, technical support, Yokogawa.

Lazok says pressure to get more out of existing production equipment is causing process-oriented manufacturers to ask plant operators to make decisions about when equipment should be repaired, and that requires giving the operators more information.

“There has not been a new oil refinery built in the U.S. in 30 years,” Lazok says. “So that's an industry that's running beyond 100-percent capacity, and they are constantly pushing operator productivity. They need to give operators more information so they can do things like predict when failures might occur. They can do that, for instance, by monitoring pressure and temperature changes around a heat exchanger and getting a feel for when it might start leaking. They can then order preventive maintenance. This helps avoid downtime and losing dollars that can never be recovered.”

Lazok says the operator console—or human-machine interface (HMI)—is the most visible change in CENTUM VP from previous versions of the system. The interface is much more graphic-oriented, making heavy use of colors and animation, but it also gives operators access to information they could not get before.

“Previous HMIs were focused only on allowing operators to control the plant,” Lazok explains. “They were built with proprietary software. But to do what customers want now, we had to use de facto industry standards that allow bringing in data not only from Yokogawa's control systems but from other vendors, like Rockwell's Allen-Bradley PLCs, or from historical databases.”

To make this transition, Lazok says, Yokogawa built CENTUM VP on the Microsoft .NET technology framework and employed a programming language called XAML.

“By using .NET and XAML, we can pick data from multiple databases—and the Yokogawa control system—and display it all on a single screen,” Lazok explains.

As users implement the system, they will use a program similar to Microsoft's Visio to map connections between the original sources of data they want to tap and the CENTUM system.




CENTUM VP, an integrated production control system, will become the flagship platform for Yokogawa Electric Corp.’s VigilantPlant Operational Excellence initiative, which seeks to empower plant personnel to take actions that optimize plant and business performance.

Operators will look at a screen resembling Microsoft's Windows Explorer, with tabbed folders representing various data sources. As operators pull data from the system, they will be able to choose how it is displayed: in graphical form, as a trend chart, or some other customized view.

While the system provides unprecedented levels of information, Lazok says companies expecting to get the most from it should consider getting their operators additional training.

With operators now being asked to use these systems to make what amount to business decisions, Lazok says they require training in new subject areas such as asset management. He also notes successful operation of this new generation DCS will require operators to be comfortable with Web-based systems.

“We are moving closer to the point where control systems and IT will intersect,” Lazok says.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.