Nuclear safety issues mount in South Korea

Recent security concerns during inspections have heightened concerns about the safety of South Korea's nuclear reactors, particularly after a recent scandal that involved the use of unverified parts.

12/11/2012


ISS SourceTiny cracks in tunnels at a nuclear plant in South Korea are hiking worries about nuclear safety in the country following a recent scandal involving the use of unverified parts.

The reactor where officials found the cracks will remain offline until regulators investigate the problem, putting extra strain on South Korea's already stretched power supply going into the winter months.

The utility Korean Hydro and Nuclear Power Co. (KHNP) said it detected microscopic cracks in six control rod tunnels at Unit 3 of its Yonggwang nuclear plant in the southwest of the country. Control rods regulate the speed of nuclear reactions taking place inside reactors.

“The cracks are not serious and there is no risk of radiation leakage,” said Jang Yong-jin, head of the mechanics department at KHNP.

Workers found the problem while the reactor was down for a regular 36-day maintenance period. But it will now stay out of service for a further 47 days as inspectors seek to determine the cause of the cracks, the South Korean Nuclear Safety and Security Commission said.

That deprives the national power grid of another source after operations stopped this month at two other reactors at the same complex to replace thousands of parts forged quality certificates.

Authorities said at the time halting those two reactors, Units 5 and 6, may result in “an unprecedented level” of strain on the nation’s power supply. They account for about 5% of South Korea’s total supply, according to the government.

“Winter here is brutal, and I am now very concerned that the unexpected shutdowns of three nuclear units will cause power shortages,” said Huh Kyun-young, a nuclear engineering professor at Kyung Hee University.

Experts have been warning about insufficient power supplies in South Korea for years, Huh said.

It remains unclear how the power supply will suffer by the extended shutdown of Unit 3, Jang said.

“Relevant departments are mapping contingency plans,” he said.

The cracks themselves are not a serious issue and have been found at reactors in such other countries as the United States and Japan, said Jae Moo-sung, a professor in the nuclear engineering department of Hanyang University.

But Jae warned the news could hurt South Korea’s efforts to export its nuclear power technology to other countries.

The problems at the South Korean reactors come amid increased scrutiny of nuclear power worldwide following the crisis at the Fukushima Dai-ichi nuclear plant in Japan during the aftermath of the earthquake and tsunami that hit the country in March 2011.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.