OSHA increases focus on workplace violence

OSHA's directive comes on the heels of recent investigations of workers being assaulted or killed while in the workplace in three different states.

09/09/2011


OSHA issued a directive on Enforcement Procedures for Investigating or Inspecting Incidents of Workplace Violence. The directive establishes uniform procedures for OSHA field staff for responding to incidents and complaints of workplace violence and conducting inspections in industries considered vulnerable to workplace violence, such as healthcare and social service settings, and late-night retail establishments.

Workplace violence is a serious recognized occupational hazard, ranking among the top four causes of death in workplaces during the past 15 years. More than 3,000 people died from workplace homicide between 2006 and 2010, according to the Bureau of Labor Statistics. Additional BLS data indicate that an average of more than 15,000 nonfatal workplace injury cases was reported annually during this time.

A recent OSHA inspection of a Maine psychiatric hospital found more than 90 instances in which workers were assaulted on the job by patients from 2008 through 2010. The hospital was cited for not providing its workers with adequate safeguards against workplace violence and a fine of more than $6,000 was proposed. OSHA has also recently cited facilities in New York and Massachusetts where employees have been killed as a result of assaults.

“These incidents and others like them can be avoided or decreased if employers take appropriate precautions to protect their workers,” said Assistant Secretary of Labor for Occupational Safety and Health Dr. David Michaels. “We have accompanied this directive with a new Web page on Preventing Workplace Violence to help employers address workplace violence issues.”

Studies by the National Institute for Occupational Safety and Health and other organizations show that employers who implement effective safety measures can reduce the incidence of workplace violence. These measures include training employees on workplace violence, encouraging employees to report assaults or threats, and conducting workplace violence hazard analyses. Other methods such as using entrance door detectors or buzzer systems in retail establishments, and providing adequately trained staff, alarms and employee “safe rooms” for use during emergencies in healthcare settings can help minimize risk.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.